Wat should a B18c1 PnP W/ supertech valvetrain, BC spec 3 cams, S2IM, TB, IHE, and chipped ecu put out? I'm just interested to see what other people got so please no bs.

 

170-200whp

 

i dont have that big of a cam but around there see sig

 

14.6 that doesn't seem right with your set up. Do you have a stock trans?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mjfubar101 &raquo;</TD></TR><TR><TD CLASS="quote">i dont have that big of a cam but around there see sig</TD></TR></TABLE>
Do u have bottom end work? I have a stock block w/ s2 IM and 70mm tb, 4-1 header, 2.5" exhaust, and its tuned by Whitfield with Crome put out 176hp 115tq haven't taken to track yet.

 

I would assume those numbers somewhat fall in place. Doesnt a stock c1 make like 138 or 140?? So you are like 30+hp over that. Out of curiousity what were you expecting??

 

Well stock it put out 153/111 so i'm just a little disappointed with the torque. Thanks for everyone's replies.

 

Yea I've never seen torque that low before on a 1.8L .. my JDM B16 put down 110 torque & 150 whp with just bolt-ons, VAFC, & GSR cams.

But anyway back to the main subject, IMO I think your setup will yield 180-195 and 123-135 torque