I just wanted to know what some of you guys have your FPR set at. I have a 99 b18b in my 96 ek with 4-2-1 dc header, J's style intake, 2 1/4 " exhaust to an obx mugen twin loop muffler, and magnacore wires. I just got this swapped into my car and add the header intake and exhaust. so i wanted to adjust the FPR. I just wanted a see ideas of were to set it at. thanks in advance for any responces


Modified by mugenek007 at 12:52 AM 2/13/2004

 

bump

 

most people are just gonna tell u dyno and have a tuner do it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeRPaul &raquo;</TD></TR><TR><TD CLASS="quote">most people are just gonna tell u dyno and have a tuner do it</TD></TR></TABLE>

That would be the best way to do it. But based on those mods, I'd just bump the pressure up 2-3lbs.

 

cool thanks. Like i said i just got it swapped so i really don't have any money to go tune it. what would stock fuel pressure be at then. cause i don't know if when iu go tit it was at stock or if it was raised some all ready.

 

ttt