put new rings, pr3 pistons, rod bearings, and stainless valves in my gsr. my car wouldnt start but its getting spark and fuel. when i checked tdc my intake cam was off a few notches (because my dumb *** was in a hurry and didnt put the distributor on right and it held the cam so that the timing belt skipped a couple of notches) so i set the timing back to tdc and did a compression test and got nothing. could i have bent my valves and therefore the valves arent seating properly causing no compression?????? let me know thanks

 

pos. do a leakdown test to find out. if it leaks from the int. manifold or exhast manifold or headers you bent the valves .