dc-1 p76 ecu pinout
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 75
Likes: 0
From: lancaster, ca, usa
dc-1 p76 ecu pinout
was wondering if anyone out there has a ecu pinout for a p76 ecu.this is a 1994 dc-1 integra rhd.or a complete wiring diagram would be great.thanks for any help
Trial User
Joined: Feb 2010
Posts: 3
Likes: 0
Re: dc-1 p76 ecu pinout
BUMP!!!
really need this diagram,
the p76 is obd1 which normally has three block connectors, A B and D,
but my ecu only has 2 block connectors A and D
i want to switch my 2 block ecu to a 3 block ecu,
i cant find a pin out diagram for my ecu, but have one for the p08 i'm plannin on switching too,,
cheers,,
Joe,
really need this diagram,
the p76 is obd1 which normally has three block connectors, A B and D,
but my ecu only has 2 block connectors A and D
i want to switch my 2 block ecu to a 3 block ecu,
i cant find a pin out diagram for my ecu, but have one for the p08 i'm plannin on switching too,,
cheers,,
Joe,
Seagull Management
Joined: Jun 2008
Posts: 15,150
Likes: 26
From: Miramichi, NB, Canada
Re: dc-1 p76 ecu pinout
2 connectors is some weird Euro ****. Normally it's for SFI (Simplified Fuel Injection) 4 injectors, but 2 of them pulse at the same time. There's a bunch of missing sensors and just plain different stuff about it. You're probably a lot better off replacing the engine and cabin harness with ones from a civic with MPFI.
This pinout is for a later version of the same setup, but it retained the OBD1 style plugs, I'm not sure if it's the same or not.
This pinout is for a later version of the same setup, but it retained the OBD1 style plugs, I'm not sure if it's the same or not.
Thread
Thread Starter
Forum
Replies
Last Post
