CEL--->Cylinder position sensor
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 1,687
Likes: 0
From: 630, IL, USA
CEL--->Cylinder position sensor
i have a JDM H23A engine in my 1992 Civic. I'm running a P28 ECU...along with the original OBD2 dizzy and injectors. I'm throwing code 9 for the cylinder position sensor, but the car still runs fine.
When I initially start-up the car (if the CEL isn't on yet) and drive it, the car runs rough. However, as soon as the CEL comes on, it drives perfectly fine (I never start driving it unless the CEL is on). Any suggestions?
When I initially start-up the car (if the CEL isn't on yet) and drive it, the car runs rough. However, as soon as the CEL comes on, it drives perfectly fine (I never start driving it unless the CEL is on). Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
glenners
Honda Civic (2001 - 2005)
2
May 20, 2016 05:44 AM
