Catback and Pulleys.???
Thread Starter
New User
Joined: Sep 2001
Posts: 540
Likes: 0
From: TC, MN, USA
Catback and Pulleys.???
I was wondering does a OEM type R catback (piping only) bolt directly to an LS?? And also I recently bought some AEM pulleys.. but only installed the power steering so far? Does it make more of a difference if i install the alternator pulley also cuz I don't feel much of anything with just the PS pulley on. What do I have to do to feel some power!??! hehe 
Honda-Tech Member
Joined: Mar 2001
Posts: 4,136
Likes: 0
From: Hilo, Hawaii
Re: Catback and Pulleys.??? (MeNMyAuto_GottaProblem)
Even if you installed the alternator pulley, you aren't going to feel significant increase in power. If you want to feel more power, get a turbo or supercharger, or get some N20. HTH.
cyber13
cyber13
Honda-Tech Member
Joined: Oct 2000
Posts: 4,490
Likes: 2
From: GTA, ON, Canada
Re: Catback and Pulleys.??? (MeNMyAuto_GottaProblem)
most of the time, gains of less then 5whp can't be registered on butt dyno, unless you train it very well...complete pulley set, might only gain 2-3whp at most on a n/a.....
as far as itr there should be no problems....
as far as itr there should be no problems....
Thread
Thread Starter
Forum
Replies
Last Post