B16A Needs Help
Thread Starter
Junior Member
Joined: Sep 2006
Posts: 39
Likes: 0
From: Kansas USA
B16A Needs Help
I did some looking around on both here and google and have yet to find a answer to my problems...
My problem is...when i first start my car and its cold outside(40 and below) my motor will not be running on all the cylinders until it starts to warm up a little bit(about 30 seconds after starting).
Also when it is cold out, if i drive my car around it will sometimes drop idle when in neutral and slowing down. Im thinking this could be because i have a blox intake manifold and no cold idle pickup. Not for sure though.
My car is a 91 Honda CRX with a JDM B16A. Mods include...I/H/E and the blox intake manifold.
Please let me know what you think this stuff could be by either posting a reply on here or PM me. Thanks
My problem is...when i first start my car and its cold outside(40 and below) my motor will not be running on all the cylinders until it starts to warm up a little bit(about 30 seconds after starting).
Also when it is cold out, if i drive my car around it will sometimes drop idle when in neutral and slowing down. Im thinking this could be because i have a blox intake manifold and no cold idle pickup. Not for sure though.
My car is a 91 Honda CRX with a JDM B16A. Mods include...I/H/E and the blox intake manifold.
Please let me know what you think this stuff could be by either posting a reply on here or PM me. Thanks
Thread
Thread Starter
Forum
Replies
Last Post