I just completed a b16 swap in my 97 civic. Everything runs great except for the CEL is on. The code is P0453 and P0450, Evap. emission system pressure sensor/ switch. The canister on my 97 is smaller and only has 1 inlet and 1 outlet and no pressure switch. The 2000 canister has the pressure switch with an inlet, a purge line and one line to the tank. Will I be able to hook this up on my 97? Will I be able to add the wiring into my harness? I used my 97 harness and wired all the vetch components into it. Any input will be greatly appreciated!