Well i recently deleted my ABS and prior to, i did a lot of research and read that you could use the ABS MC but had to cut the line but a larger fitting on it (M12) and re flare it, or you can get a non-ABS MC.

Well i found a inverted flared adapter fitting that converts the 10mm non abs brake line to the 12mm abs MC, you just have to bend the line a little bit. Ive seen a lot for people searching for this with no answers and it took me a while to find it, just thought id share it with you guys.

PN: BQ43

https://www.brakequipstore.com/BQ43.html

EDIT: CAN A MOD MOVE THIS TO THE BRAKES SECTION?

 

This has been gone over a 100x in the custom engine bay thread. Also with part numbers for this adapter or M12x1.0 to 3an. Advance auto has adapters for $2 also. It's simple to just cut and re flare the 92-95 civic brake lines or integra rs lines. Takes 5 minutes.

 

well i searched and took me a while to find them. Nothing showed up on HT or any other forum.