The roll cage is all red, it looks half orange and half red in 1 pic, its all red with some scratches, nothing some spray paint can't fix and 80% of the scratches are from the sleeves, (the sleeves will cover these up when properly mounted in a car, and not in your garage, and the rest of the scratches are/can be covered with pads)...not sure what brand the cage is...but it survived a roll over in a prelude which totaled the car. the cage shows no signs of flex, cracks, bends, or anything like that. the welds are really nice too, "tipped over roll of coins style". It was made for a 93 Honda Prelude (not sure what gen that is, 4th?...) but was sold to me bolted in my eg hatch. it fit fine in my hatch except it rubbed against the driver side door panel when the door was shut, but completly cleared the passenger side, so I'm sure if you mounted the cage dead center it would clear both sides. Also, the bars that point towards the rear don't mount flush with the civic's fender wells, but they do bolt tightly(fender wells are round, mount points are flat). It's a 6 point cage, but right now, I don't have the bars (2) that go along the bottom of each door (makes getting in and out of a daily driver difficult), so as of now, it's classified as a 4 point cage (I'll see about getting those...) there's AEM (so I'm told) pads that are like 2 months old. you'll see them in the pics. reason I'm selling:don't really see the need for a roll cage in my gsr hatch and I need money for new carpet in the car. Mounted in a prelude, everything will be flush, and fit exactly as it was designed to. Mounted in a civic, everything the same except for the mount spots on the rear fender wells. Uninstalation was a snap so I'm sure instalation is quick too, besides the welding. PM me for questions/offers. I guess this cage goes for like $649-$800, so I'm asking $550 obo+shipping, or pickup (preferred). I have vouch people if needed. thanks
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
NOW ASKING 450 OBO or trade for bseries/gsr header and/or test pipe!


Modified by Bull_head360 at 3:27 PM 9/27/2004


Modified by Bull_head360 at 8:32 PM 10/12/2004


Modified by Bull_head360 at 8:38 PM 10/12/2004

 

bump, cuz a half hour later, I'm already on the 3rd page...o, and lemme know if any of you wanna get rid of your carpet!

 

how much for it???

Landon

 

you need to resize yO!

Landon

 

dont know how to resize, would if i could, believe me! shoot me an offer. Bump for taking pictures of pictures

 

and thanks for posting the big *** pictures on my thread, since I dont even know how to do that...

 

you can purchase those for about 800 i think. its a basic autopower cage

 

morning bump, so I'm learning that this cage goes around $649-$800, so I'm looking to get like $550 for it. nothin like a roll cage to make someone else say "damn, i bet that ****'s quick!" then prove it to them

 

my mom had her second serious seizure, keep her in your prayers guys, thanks

 

will this fit in a EK coupe?

 

ok, so here are some specs: roll cage made for a 93 honda prelude
93 PRELUDE
Wheelbase:100.4
Width:69.5
Heighth(spelling?):50.8

EG civic
Wheelbase:101.3
Width:66.9
Heighth:53

EK coupe
Wheelbase:103.2
Width:67.1
Heighth:54.1

my conclusion: This cage will fit in an EK with more width than in my EG (good), and it will definatly clear the roof of the car (also good) and will also have good contact with the rear wheel wells. so you're answer is yes, this will fit in your EK, if you're local, you can even bring your car to my house and we can do a test fit so you can see how it fits in your car.

 

OBO y0!

 

cant.....let....thread....die....

 

i saw an eclipse with "DOHC VTEC" stickers on it only in florida...i swear

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bull_head360 &raquo;</TD></TR><TR><TD CLASS="quote">i saw an eclipse with "DOHC VTEC" stickers on it only in florida...i swear</TD></TR></TABLE>
I have seen it as well. Also a eclipse with vtec tuning on it. I would get the cage, but way to much for used cage. But good luck

 

okay....I'LL ENTERTAIN ALL OFFERS!! i want this outa my garage

 

$150

 

hmm...looking for more than that, ("well u said that you'd entertain all offers...") if you guys have a header and/or test pipe for sale plus or minus cash, i'd be down with that. and it'll take me a while to respond because i have no internet at my new house. thanks guys

 

I got a high flow cat.

 

i think ill give you a free bump austin.

 

thanks anthony, i already have a high flow cat, but im kinda thinkin about goin with a test pipe, but its not a big deal, cuz its just more work to install. really all i want is a header