I got a d16a6 motor for my crx, but the guy couldn't find the crank pulley, so i bought one off ebay, but when I went to put the pulley on the motor, i realized that it was too big. There was slop between the pulley and the crank snout. I did some searching and found out that there are 2 types of cranks in a d16a6, one with a 24mm end, and one with a 22 mm end. As of now, i'm basically screwed, because nobody on ebay knows a damn thing about this, and I can never know if they have a 22 or 24 mm crank snouted crank pulley. I'm planning on having a bushing made or something like that, that can take up the slack of the difference, BUT I would really just like a crank pulley that fits, without rigging this up. Anybody know where I can find one, or what to do?

P.s. Unorhtodox and other companies, only make pulley's for the 24mm crank snout ends, so I think i'm SOL there as well.

 

bump