Custom Arias Pistons for sale...HIGH COMP
I bought some custom ARAIS Pistons that i decided was too high of comp for me. It was ment for a motor being built by JG but soemhow the deal didnt go through.
It was a custom setup so the only information i have is that it is:
12.5:1 to 13.0:1 depending on head...with a 84mm BORE. BORE 8.307" PIN .827 AND C.H. 1.045.
thats all the info i have and it requires a 2 ring setup..not the typical 3 ring setup. I dont have the rings or wrist pins but you can purchase them from anywhere (Arias, true seal etc)...I DO have the wrist pin locks.
Selling for $350 obo due to the missing items...thanks
Modified by Supah_Eg6 at 4:25 PM 9/13/2004
It was a custom setup so the only information i have is that it is:
12.5:1 to 13.0:1 depending on head...with a 84mm BORE. BORE 8.307" PIN .827 AND C.H. 1.045.
thats all the info i have and it requires a 2 ring setup..not the typical 3 ring setup. I dont have the rings or wrist pins but you can purchase them from anywhere (Arias, true seal etc)...I DO have the wrist pin locks.
Selling for $350 obo due to the missing items...thanks
Modified by Supah_Eg6 at 4:25 PM 9/13/2004
do you have any pic's b17integra@yahoo.com
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post



