i need to find more internals for my car like a cam shaft ect. but when ever i look for stuff for my h23 i cant find anything can any help me

 

well you could get camshafts from crower... i have the stage 1 on right now

 

webcams, jg, crower, gude , all make cams for the h23. is this all motor or turbo?

 

what would bbest quality for the h23? im still debating is i should stick with my h23 or get a head swap...

 

well i want to get my internals strong so i can turbo it and run higher boost

 

i have jg cams sitting in my garage that have never been installed...i dont know if they are worth putting in...and i would also have to get someone to tune it...and i cant install it myself because i dont have a torque wrench :\

someone let me know if its worth installing because im running a h23 with a sleeved block and new pistons rods etc garret t3/t4 turbo and just let me know if its worth installing my JG cams. thanks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hOndafienD 04 &raquo;</TD></TR><TR><TD CLASS="quote">what would bbest quality for the h23? im still debating is i should stick with my h23 or get a head swap...</TD></TR></TABLE>

i'd have to say web cams.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eMpAtHy &raquo;</TD></TR><TR><TD CLASS="quote">
someone let me know if its worth installing because im running a h23 with a sleeved block and new pistons rods etc garret t3/t4 turbo and just let me know if its worth installing my JG cams. thanks.</TD></TR></TABLE>

sure, if u want to get every ounce of power out of your motor.

 

where can i find web cams, prices, specs, and order them...

 

i need to find get some parts for my car

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hOndafienD 04 &raquo;</TD></TR><TR><TD CLASS="quote">where can i find web cams, prices, specs, and order them...</TD></TR></TABLE>

Shoot 2point6 a pm, He can set you up

 

http://www.webcamshafts.com

 

how reliable are these? and what are these like a stage 1? what are stock specs? just for comparrison purposes....have .390 lift and 230 duration

 

well i was thinking how could i pull every ounce of power out of my motor with out turbo charging it i want my car an n/a car kind of if i can still get some good wheel hp what you think i should get??

 

The only company that makes all new billet replacement camshafts is Crower. All the rest are just regrinds of a stock camshaft. They come in the regular three stages, with stages two and three requiring the use of upgraded springs and retainers.

 

i emailed crower and no1 replied..wtf! lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hOndafienD 04 &raquo;</TD></TR><TR><TD CLASS="quote">i emailed crower and no1 replied..wtf! lol</TD></TR></TABLE>

call them instead

 

will do

 

Here's an e-mail I got from them a while back--

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brian Crower &raquo;</TD></TR><TR><TD CLASS="quote">
Cams are available and just about to be released to the general public.

Similar listings as the LS (Stage 1, 2, 3, etc...) along with a spring and
retainer kit. Cost will be $400 for the pair and another $339 for
spring/retainer kit.

Thanks for your interest in Crower,

Crower Cams & Equipment Co, Inc
6180 Business Center Court
San Diego, CA 92154-5604 USA
Tel: 619-661-6477
Fax: 619-661-6466
http://www.crower.com


</TD></TR></TABLE>

This was on Feb 11 04...

 

i was wondering how much horsepower i could pull out of my h23 by not turboing it it and if i went n/a would it be good to make my h23 a vtec

 

i would like to keep mine non-vtec..personally i think dats the best way to go...