on a scale of 1-10.. ten being hardest.. how hard is to replace a tranny? ive never done it before so i would like to know.. btw im not sure if its the tranny yet might just be might clutch cuz my car deoesnt run when i put it in gear.. im hoping its my clutch but i want to know how hard it is to remove a tranny?

 

It's not that hard took me 3 hours tops. on the 1 to 10 scale I would say a 4.5 good luck man.

 

if you got 2 nice jacks and some air tools its a breeze to take off. its also nice to have big buff asian friends to hold up the tranny while they bolt up everything

 

its not hard. I took off the whole engine and tranny in less than 3 hrs. so im guessing to change it like 2 hrs. by yourself with regular tools.

 

my friend recently took his trans out of his coupe and it was his first time and it wasn't that hard it took him a 2-3 hours

 

does anyone have a link to a helms manual on how to take the tranny out? with diagrams/pictures?

 

If you have access to air tools, job is EASY as ****. Don't forget to have a torque wrench and proper sequences for bolts.

 

id say like a 5.5 not that bad but may take a while

 

took me about 3-4hrs to take out and put in the new tranny!

 

https://honda-tech.com/zerothread?id=811691

 

u have to take out the axles to take the tranny out rite?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DeviousCTR &raquo;</TD></TR><TR><TD CLASS="quote">u have to take out the axles to take the tranny out rite?</TD></TR></TABLE>

Yeah. Thats a 20 minute job though. Pop the axle nuts, the 2 nuts holding the LCA and the steering arm to the hub and then slide it out. Not a big deal at all.

 

and the intermidiate shaft as well

 

would be great if you have someone helping you though

 

everything is just common sense in a way. for first timer, will take alittle while. im skinny and i can hold up a tranny pretty ez.

rate 5