i have a 91 civic hatchback dx. i owned the car for about 2 years i first had a b20 vtec installed an then went turbo and i am now selling it. I am having a kid and can no longer afford it!!! The fastest i ran with my turbo set up was a 11.3 at 119 on slicks. All parts listed are in good condition and i will garuntee against any defects.

Will here are all the parts for sale::
I accept paypal (with 3% fee), prefer cash and pick up in person, but i will ship.

<U>Turbo kit $1700</U>- sparks racing manifold, 2.5 downpipe, intercooler+piping, bov, wastegate 8lb spring, t3t4 turbo 58trim. the manifold and downpipe are wrapped with headerwrap, 3bar map, it ran perfect i ddin't have any trouble with boost spiking. again $1700 obo

<U>b16 head</U> with skunk2 springs and retainers, port-n-polish valvejob from alaniz i paid $800 for the head work. will sell for $900=====sold=========

<U>Jg edelbrock</U> intake manifold for b16 $250+++++++++sold sold++++++

<U>radiator</U> aluminum for 92 civic $100 ===========sold sold sold==
electric fan $50 this combo kept my a cool 170 degrees at all timesA++++

<U>LS bottom end $750</U>
ross racing pistons, eagle rods, balanced crank, type r oil pump, r water pump, oil pan, $750 ==============sold sold sold============

Gsr arp head studs $75=========sold sold sold=============

Aasco aluminum flywheel $200=======sold==========

ACT Clutch very good condition $200=========sold==========

B16 cable tranny in great condition no grinds $500++++++++++sold sold sold+++++++

B16 cable tranny grinds horribly $150==========sold===========

Richmond racing spool $250==========sold==========

Aem fuel rail $100sold==============sold=========

550 rc injectors low impedence$200

h22 310 injectors $100=========sold=============

70 mm throttle body$200==========sold===============

fuel regulator adjustable, boost dependant $50=====sold==========

Hurst short shifter $25===========sold==========

Hasport shift linkage $100===========sold===========

Pr3 ecu chipped by erick's racing $200=========sold==============

Place racing crossmember $150=============sold============

APEX VAFC $100+++++++++SOLD SOLD+++++++++++++++++

Polished valve cover $100

Gsr cams with adj. cam gears $100+++++++++++SOLD SOLD+++++++++++

KYB adjustable shocks $200========sold===========

Eibach sportline springs $100==========sold==========

Accord rims that were welded and redrilled to fit a civic $250=====sold=======

Engine mounts for a b16 in 91 civic $100========sold==========

Lsvtec conversion kit $30==========sold=========

axles for b16 swap $100=========sold===========

innovate wide band o2 sensor $300===========sold=========

Nitrous system $600
direct port system with a 100 shot set up: bottle, hose, solenoids, nozzles
i will also include another single fogger system i have that is missing a fuel solenoid($40) i used the same tank for both setups

if you want pics let me know i will email them, please make reasonable offers on the items


Modified by quick1racer at 5:23 PM 8/31/2004


Modified by quick1racer at 6:41 PM 9/1/2004


Modified by quick1racer at 3:58 AM 10/14/2004


Modified by quick1racer at 6:06 AM 10/29/2004


Modified by quick1racer at 6:18 PM 11/11/2004

 

the accord rims have falken azenis rubbers on all 4 corners 2 tires need to be replaced. the other 2 are in great condition

i also have a set of mickey t's slicks on 15x7 rims 22.5x8 slick only used 4 times at track. in great condition $350

 

 

left pm

 

pics of the head please, good pics of combustion chambers and intake and exhaust ports
email to ssetek@comcast.net

 

I would like more info on the short block. What c/r pistons are they, what kind of bearings and condition. Is the block sleeved, etc. Please send me a PM or email. Oh and shipping to Ohio 44849

 

the engine is still fully assembled i haven't had time to tear it down yet.
the short block has9.0to1 compression with a b16 head. The engine doesn't have have more than 1000 miles. i took the oil pan off about 200 miles ago to change the gasket and their were no traces of metal anywhere. it still contains stock sleeves at 81.5 the block is from a 91 integra

 

PMED

 

it

 

what kind of throttle body is that?

very interested

 

Jg edelbrock intake manifold for b16 $250
Is this the victor x?

 

waiting on reply.. i want to see that intakeimanfold

 

it is a jg edelbrock intake manifold

 

 

bump bump

 

 

I hate to low ball you, but what is the cheapest i could get the LS short block for shipped to Ohio 44849? Thanks, MArk

 

bump bump

 

 

 

400 for the good b16 trans?

 

450 picked up

 

bump bump bump

 

can you do $750 shipped for the ls shorty to 85255 scottsdale Az?

 

$815 to your door