hey, i already ordered the mugen sport suspension from kingmotorsports.com for my ep3 and i had a couple ?s concerning camber. for the front, can i just get the bolts specified in the helms manual (90188-S5A-000)? in the book it says i can adjust the camber plus or minus 30' by using two bolts. is that gonna be enough to correct the negative camber caused by the drop? or am i going to have to order the spc bolts to go along with the spc rear arms i was planning on using?

 

The Mugen SS appears to include a minor camber correction. After I put the Mugen SS on, all I needed was a regular alignment, nothing unusual at all.

The rear wheels appeared slightly negative, the front wheels about zero. This is about what an EP3 looks like stock, too.

Victor Perri didn't need to do anything unusual for the alignment on his EP3 w/the Mugen SS, either.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">The Mugen SS appears to include a minor camber correction. After I put the Mugen SS on, all I needed was a regular alignment, nothing unusual at all.

The rear wheels appeared slightly negative, the front wheels about zero. This is about what an EP3 looks like stock, too.

Victor Perri didn't need to do anything unusual for the alignment on his EP3 w/the Mugen SS, either.</TD></TR></TABLE>
yeah, same deal with my friend...just needed a regular alignment and all is good

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">Victor Perri didn't need to do anything unusual for the alignment on his EP3 w/the Mugen SS, either.</TD></TR></TABLE>

Ya, what he said!

-Victor

 

thanks for the quick replies