Im in the process of pulling out my b18c swap due to a blown clutch or tranny. Well this is my excuse to finally tear my motor down and install all the other parts Ive been wanting to. This will be my first motor tear down and rebuild. Well Im assuming Im going to have to send the block out to be machined before I can install my pistons and rings.

So, what books and manuals do I need to purchase before I begin this project? I have access to an awesome selection of tools and the help of a pro-stock engine builder.

 

factory helms manual

http://www.helminc.com

 

So which ones on the site? Theres like 4 different ones. I will also be needing the electrical one for wiring again later.

If someone here could help me search this site and give me the links to the actual books I need to order it would be great. Im kinda confused by some of the choices.

Would I need the Acura Integra 96+ Service manual for the engine? And the 94 civic service manual for the electrical diagrams? Im tearing down my gsr swap and also most of my car. The checkers/autozone manuals just dont have half the information I need.


Modified by Tur*bLu at 7:32 PM 8/28/2004

 

i didnt know what year your motor was so i put in 1995, if its a different year then click on the link and change the year on the left hand side of the page.

for disassembly/reassembly

http://www.helminc.com/helm/pr...LDKN0

wireing

http://www.helminc.com/helm/pr...LDKN0