Someone please Help throttle body
Thread Starter
Honda-Tech Member
Joined: Nov 2003
Posts: 3,613
Likes: 0
From: Las Vegas, nv, lv
Someone please Help throttle body
okay long story short when i had my gsr Tb on my skunk 2 intake manifold my vafc 2 would read the throttle at 100%... No i have bought a brand new Itr throttle body along with a b16 cable and now when i go full throttle it only read 89.4% can anone please help.... i turned the pully and it is at 90 degrees open full... thanks Art- 
Thread Starter
Honda-Tech Member
Joined: Nov 2003
Posts: 3,613
Likes: 0
From: Las Vegas, nv, lv
Re: Someone please Help throttle body (Fuuma0083)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fuuma0083 »</TD></TR><TR><TD CLASS="quote">you might have to reset the vafc2 and re-do the initial setup for it again to learn the new throttle positions.</TD></TR></TABLE>
thats what tony at Jhp said thanks for your help man
thats what tony at Jhp said thanks for your help man
Very Emergency!!
Joined: Dec 2003
Posts: 3,666
Likes: 0
From: ....Things Just Getting Good..... Reno, NV
Re: Someone please Help throttle body (Fuuma0083)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fuuma0083 »</TD></TR><TR><TD CLASS="quote">you might have to reset the vafc2 and re-do the initial setup for it again to learn the new throttle positions.</TD></TR></TABLE>
make sure you initialize the vafc first. this will delete any info in the vafc and bring it back to factory setings.
make sure you initialize the vafc first. this will delete any info in the vafc and bring it back to factory setings.
Thread
Thread Starter
Forum
Replies
Last Post
