Just wanted to see if anyone knows if Neuspeed Race Springs for 89-91 Honda Civic would fit/work on a 2001 Prelude. I know this sounds crazy, but I have a racer buddy who has a set of the NRS that he is not using and he offered them to me. Yes/No, Flames, calls of Assclown. All replies welcome!

 

No. No, no, no and no. Don't want to be too negative but... no.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX Lee &raquo;</TD></TR><TR><TD CLASS="quote">No. No, no, no and no. Don't want to be too negative but... no.</TD></TR></TABLE>

Haha ... care to explain why?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zygspeed &raquo;</TD></TR><TR><TD CLASS="quote">
Haha ... care to explain why? </TD></TR></TABLE>
The springs will be too short and too soft for the Prelude plus a Prelude uses the same tail shapes top and bottom, front and rear and the Civic uses a smaller (I think) top tail wind and definately smaller bottom wind on the front and different wind on the rear.

Basically, I doubt there is any dimension or specification that would cross over, thus...no.

 

Bah, you can work miracles with a hacksaw and a blue-tip wrench.

 

Editted as I made a tongue-in-cheek wise crack but got the wrong Todd. Sorry Todd00.


Modified by CRX Lee at 7:37 PM 8/23/2004


Modified by CRX Lee at 7:38 PM 8/23/2004

 

Thanks for the replies. I kinda figured that would be the case!