FS/FT: Neuspeed N2 B-series header, JDM OEM sedan corners, del Sol VTEC LCAs, generic sri
Thread Starter
Member
Joined: Oct 2001
Posts: 5,261
Likes: 0
From: Tacoma, WA
FS/FT: Neuspeed N2 B-series header, JDM OEM sedan corners, del Sol VTEC LCAs, generic sri
I don't have a vouch thread but I've dealt with about 15 or so people on H-T, so if you need references I could dig some up. I'm not going to ruin my name over these parts though, so please trust me when I say I'm not a scammer 
Pickup preferred obviously but will ship. I can also meet you halfway within reason. I take PayPal (+3% if you buy the header), or you can send me a money order.
And if anyone needs more/different pics just let me know. On to the parts:
1st gen VAFC in great condition. Comes with stand, clean harness, instructions on cd. $185 shipped $175 picked up.
JDM OEM Honda corners for sedan $30 picked up, $38 shipped Good condition, except the driver's side corner mounting tab is broken. You can zip tie it if you're that concerned, although the corner will sit fine and stay in place without being screwed in. Sorry for the shitty pics.
Short ram intake $25 picked up, $32 shipped OBO. Filter's pretty clean. Good condition. Fit an ITR TB in an EG just fine.
OEM del Sol VTEC lower control arms $35 picked up, $45 shipped. These have sway bar holes, and are in good condition w/~45k miles on 'em. The only problem is that the driver's side LCA has a bushing that needs to be replaced. No big deal, just press it out and press in a new one.
Neuspeed N2 B-series header. 4-2-1, 2 piece. $80 picked up, $100 shipped SOLD Decent condition. Pics are an accurate representation of condition...as you can see, some scratches and rust. Also the bottom primaries are flattened/scraped a bit, but not terribly bad. I couldn't get a real good pic to show the depth, but honestly, it probably doesn't effect flow at all. Comes with donut gasket.
Thanks for looking
Modified by nw.dave at 9:12 AM 9/24/2004
Pickup preferred obviously but will ship. I can also meet you halfway within reason. I take PayPal (+3% if you buy the header), or you can send me a money order.
And if anyone needs more/different pics just let me know. On to the parts:
1st gen VAFC in great condition. Comes with stand, clean harness, instructions on cd. $185 shipped $175 picked up.
JDM OEM Honda corners for sedan $30 picked up, $38 shipped Good condition, except the driver's side corner mounting tab is broken. You can zip tie it if you're that concerned, although the corner will sit fine and stay in place without being screwed in. Sorry for the shitty pics.
Short ram intake $25 picked up, $32 shipped OBO. Filter's pretty clean. Good condition. Fit an ITR TB in an EG just fine.
OEM del Sol VTEC lower control arms $35 picked up, $45 shipped. These have sway bar holes, and are in good condition w/~45k miles on 'em. The only problem is that the driver's side LCA has a bushing that needs to be replaced. No big deal, just press it out and press in a new one.
Neuspeed N2 B-series header. 4-2-1, 2 piece. $80 picked up, $100 shipped SOLD Decent condition. Pics are an accurate representation of condition...as you can see, some scratches and rust. Also the bottom primaries are flattened/scraped a bit, but not terribly bad. I couldn't get a real good pic to show the depth, but honestly, it probably doesn't effect flow at all. Comes with donut gasket.
Thanks for looking
Modified by nw.dave at 9:12 AM 9/24/2004
Trending Topics
Honda-Tech Member
Joined: Dec 2003
Posts: 815
Likes: 0
From: NC EH SQUAD, BIZZLE
Re: FS/FT: Neuspeed N2 B-series header, JDM OEM sedan corners, del Sol VTEC LCAs, generic sri (nw.da
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nw.dave »</TD></TR><TR><TD CLASS="quote">Replied; I also got an email from Sam Montalvo...is that your friend? </TD></TR></TABLE> naw don't know him , but i didn't receive any reply yet,lmk.peace
Thread
Thread Starter
Forum
Replies
Last Post
nwdave
For Sale
25
Aug 17, 2004 12:47 PM
