alright i got the motor up and running and drove it home from philly ( about 70 miles of driving) and a couple thing happened. 1. when i was driving it started pulling really really hard to the left. 2. next it felt like someone was pulling the wheel then letting go, then pulling, then letting go.... constantly like that every now and then. 3. a lot of grinding noise coming from making hard left and right turns.

i was wondering what these symptoms could lead too?? was it from my axle binding?

so today i took my bro out for a spin and when letting go of the clutch into second gear it popped. so i reached my hand under the car, and the drivers side axle was broken. i could stick my hand in the rubber part of the axle by the rotor. i dunno that much about axles sorry. so was all of that due to binding? i am using the 93 accord intermediate shaft, with the 90-93 teggy axles. should i step down to the slightly smaller 89 teg axle on the drivers side? the passenger side is fine!

thanks everyone!

 

How low is your car?
LSD?

 

no LSD, and i was lowerd, but i raised it back up to stock.

 

wow i have that same axle setup and it binds on turns but not enough where they should brake anytime soon. Im prolly about 1.5" lower than stock.

 

maybe that axle was just fucked up. hasport has the custom axles for that swap, but they aint cheap: http://hasport.com/shop/index.php?cPath=27_30

 

thanks for the link man

 

no prob...just helping a brother out