FS: 91 b16a hatch - Ohio
Ok i have had this car for more then 3 years and i think i want to start something else
the motor swap was done about 5 months ago. the motor since it has been in my car has mabye had less then 1500 miles on it. i dont drive it that much at all.
trust me you can ask any of my friends that know me and they will tell you the same.
When i bought the car it was completely stock and not till last christmas did i start to do anything to it. so all the parts on it are fresh. although the body has just a little over 196,000 on it but is still in awsome shape. there is a little bite of rust on it but not much at all.
here are few pics of what i have online i will get some more if any one would request them.


this is a pic of my car with the race wheels and tires i have for it that will come with the car as well. i only did 2 auto-x's with this motor, suspension, and brakes that i have on the car now.
(Motor)
Jdm b16a
Cable tranny
and Pr3 ecu
New seals on the top end of the motor
new head gasket
timeing belt
water pump
tensioner
Clucth
Plugs
ngk plug wires
cap
rotor
b&m Fuel presure regulator
b&m fuel presure guage
Custome Wireing harness that looks like the stock harnes
Greddy 4-2-1 header
High flow cat
OBX cat back (sounds Awsome)
new axle's
custome linkage
AEM intake that i repainted in gun metal
Grounding kit
Custom shaved and powder coated valve cover (black)
Also with give you my jdm b18c valve cover that was only on the car for like 1 month
(Suspension)
Koni yellow shocks
Skunk1 coilovers 350/450 spring rates
progress camber kit
88 civic lower controll arms straight from honda
urathane bushing kit (not installed but have the hold kit in basement)
Suspension tech rear sway bar
New upper ball joints
New lower ball joints
New tie rod ends
Just had an alignment done on it out at honda R&D 2 months ago
upper front strut bar
rear upper strut bar
rear lower tie bar
new upper front controll arms from honda
(Body)
Pewter grey in color
tinted windows
amber corner lights
amber bumper lights
amber side markers
black projector head lights
Konig helium wheels and Falken aziena sport tires with extended studs
(brakes)
New rear drum breaks only a year old
front: hawk hp + pads and brembo blank rotor's
(Intereior)
Avus race seats
G-force 5 point harness for driver side
hurst short throw shifter
Blaupunk In dash CD player 50x4 watts
blaupunk speakers
Sterring wheel
single pod guage (oil pressure guage)
I have tons of parts that will also come with the car.
And over $9,000 already invested in the car not includeing the cost of the car.
I have a set of winter wheels with brand new tires that only have 50 miles on them, also my set of race wheels and tires will come with it as well.
there are a few other things that i havent thought of yet that are new but i will let you know when i figure that out.
Asking price $4,100 obo
needs to go.
call my cell or post on here if you are interested.
cell 614-314-4566














Modified by joesefcivic at 9:31 PM 10/30/2004
Modified by joesefcivic at 11:09 PM 11/11/2004
Modified by joesefcivic at 11:40 PM 11/11/2004
Modified by joesefcivic at 9:59 PM 12/9/2004
Modified by joesefcivic at 12:05 AM 12/31/2004
the motor swap was done about 5 months ago. the motor since it has been in my car has mabye had less then 1500 miles on it. i dont drive it that much at all.
trust me you can ask any of my friends that know me and they will tell you the same.
When i bought the car it was completely stock and not till last christmas did i start to do anything to it. so all the parts on it are fresh. although the body has just a little over 196,000 on it but is still in awsome shape. there is a little bite of rust on it but not much at all.
here are few pics of what i have online i will get some more if any one would request them.


this is a pic of my car with the race wheels and tires i have for it that will come with the car as well. i only did 2 auto-x's with this motor, suspension, and brakes that i have on the car now.
(Motor)
Jdm b16a
Cable tranny
and Pr3 ecu
New seals on the top end of the motor
new head gasket
timeing belt
water pump
tensioner
Clucth
Plugs
ngk plug wires
cap
rotor
b&m Fuel presure regulator
b&m fuel presure guage
Custome Wireing harness that looks like the stock harnes
Greddy 4-2-1 header
High flow cat
OBX cat back (sounds Awsome)
new axle's
custome linkage
AEM intake that i repainted in gun metal
Grounding kit
Custom shaved and powder coated valve cover (black)
Also with give you my jdm b18c valve cover that was only on the car for like 1 month
(Suspension)
Koni yellow shocks
Skunk1 coilovers 350/450 spring rates
progress camber kit
88 civic lower controll arms straight from honda
urathane bushing kit (not installed but have the hold kit in basement)
Suspension tech rear sway bar
New upper ball joints
New lower ball joints
New tie rod ends
Just had an alignment done on it out at honda R&D 2 months ago
upper front strut bar
rear upper strut bar
rear lower tie bar
new upper front controll arms from honda
(Body)
Pewter grey in color
tinted windows
amber corner lights
amber bumper lights
amber side markers
black projector head lights
Konig helium wheels and Falken aziena sport tires with extended studs
(brakes)
New rear drum breaks only a year old
front: hawk hp + pads and brembo blank rotor's
(Intereior)
Avus race seats
G-force 5 point harness for driver side
hurst short throw shifter
Blaupunk In dash CD player 50x4 watts
blaupunk speakers
Sterring wheel
single pod guage (oil pressure guage)
I have tons of parts that will also come with the car.
And over $9,000 already invested in the car not includeing the cost of the car.
I have a set of winter wheels with brand new tires that only have 50 miles on them, also my set of race wheels and tires will come with it as well.
there are a few other things that i havent thought of yet that are new but i will let you know when i figure that out.
Asking price $4,100 obo
needs to go.
call my cell or post on here if you are interested.
cell 614-314-4566














Modified by joesefcivic at 9:31 PM 10/30/2004
Modified by joesefcivic at 11:09 PM 11/11/2004
Modified by joesefcivic at 11:40 PM 11/11/2004
Modified by joesefcivic at 9:59 PM 12/9/2004
Modified by joesefcivic at 12:05 AM 12/31/2004
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94lsboost »</TD></TR><TR><TD CLASS="quote">I like! but a little too steep for me</TD></TR></TABLE>
Gotta pay to play...
Gotta pay to play...



Free bump, for nice car and price