$125 painted too the whole set up
hahahaha
it runs 11.3 PSI
D16
1200 total kit price
MSD 6AL
MSD BTM
V-AFC for boost fueling
450cc inj
2g eclipse BOV
2g eclipse turbo
adaptor plate to use stock O2 housin
mandrel bends
couplings
boost gauge
A/F meter
HF mani
Starion IC


And MORE!!!!
http://www.thedropshop.tv/cheapo


[Modified by Usdm ED9, 6:02 AM 12/8/2001]


[Modified by Usdm ED9, 6:06 AM 12/8/2001]

 

It's ugly but then if your going for function and not fashion...your doing alright. Better hope it works.

 

Looks decent...very good for 125 bones tho. How old is it? Check the manifold for cracks.

 

joint looks kinda old...

 

Id buy just the manifold...looks like iron........Id use the turbo as an anchor.

 

ewwww haha j/k as long as it gets the job done

 

That setup works just fine. I have the same type of thing, and actually the manifold is the cast iron unit from Honda so it's much more resistant to cracking than tubular joints. It might be more restrictive than you'd like, but if you p&p it or even extrude hone it it will flow pretty well.

 

I'm sure for $125 you're not getting the turbo so you can get a new or rebuilt one.

 

Turbo is too small

 

For $125 the turbo could be made out of playdough. I'm sure it's not included.

 

Yeah that'd be a nice pickup if all that was included, but yeah would use the turbo for a paper weight.

 

thats a stock mitsu turbo... or so it looks... and that wont give u much power at all

 

yea it looks like a 14B, stock 1G turbos.

 

its type turbo caca

 

It's a Mitsu T-25....pretty small.

 

Its probably pretty good size for an ATV

 

BWAHAHAHHAHAHAHAAA

 

looks like an HX mani + mitsu turbo locash style... many a 1.5liter hatch have been turned into lil street terrors with this setup. $125 is good if the turbo doesnt need a rebuild, otherwise you got about $75 worth of junkyard parts there.

 

looks to me like a 14b(decent topend but not much) and a crx hf manifold painted with hight temp paint ive seen this work before its a bitch running the ic pipes depending on the intercooler id go for a conquest/starion ic but i like the adapter plate where did you find that anyway? yes its worth 125 it takes a little work but its a pretty quick little system

 

up