2.5" Exhaust video clip
Finally got around to getting a video clip made of the exhaust system I built a couple weeks ago...enjoy!
I should try to get a clip of in and outside of the car while I'm driving...because I know the exhaust will sound different when there's a load on the engine. When the car is back on the road (down due to urethane bushing swap) I will get pics of the system.
System consists of:
- 2.5" piping, header-back
- 2.5" mandrel bends
- 2.5" baffled resonator
- 2.5" non-baffled resonator
- 2.5" straight through Magnaflow muffer
- Ractive black chrome oval tip
Without further adieu: 1990 Honda Accord 2.5" Full System
I should try to get a clip of in and outside of the car while I'm driving...because I know the exhaust will sound different when there's a load on the engine. When the car is back on the road (down due to urethane bushing swap) I will get pics of the system.
System consists of:
- 2.5" piping, header-back
- 2.5" mandrel bends
- 2.5" baffled resonator
- 2.5" non-baffled resonator
- 2.5" straight through Magnaflow muffer
- Ractive black chrome oval tip
Without further adieu: 1990 Honda Accord 2.5" Full System
sounds good, i couldnt image there being a raspy sound on account of the fact you have 2 resonators, but.... is it the video or the exhaust making that raspy noise
That's not raspy to *my* ears...raspy to me is that bees-in-a-can sound made when you throw one of those big-*** fart cans on your car... 
I've been told it sound "exotic-esque"... :D Nice and deep when you're just cruisin', but gets throaty when you step on it.
Thanks for the props!

I've been told it sound "exotic-esque"... :D Nice and deep when you're just cruisin', but gets throaty when you step on it.
Thanks for the props!
Thread
Thread Starter
Forum
Replies
Last Post



