A friend of mine is doing a junkyard setup on his d16z6 and is going to run a cx manifold for the time being. What turbos can he run on that manifold? I know he has to make an adapter plate, but what turbos are most using? Thanks!

 

BMC makes all kinds of adapter plates for the HF manifold.

http://www.bmcrace.com

 

You can run a mitsubishi turbo directly to the manifold with no adapter plate.

 

If that were true, why do they sell DSM-HF manifold adapter plates?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beepy &raquo;</TD></TR><TR><TD CLASS="quote">If that were true, why do they sell DSM-HF manifold adapter plates?</TD></TR></TABLE>because of misinformation given out on ht on a daily basis and people blieveing it!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SynTeg &raquo;</TD></TR><TR><TD CLASS="quote">You can run a mitsubishi turbo directly to the manifold with no adapter plate.</TD></TR></TABLE>

I tried bolting directly a TD05H from a 1st gen DSM to an HF manifold...it wasn't going to happen.

 

yeah i have the hf manifold and the adapter plate and turbo i was going to use it on a civic, but you have to loose the AC so i just got a log manifold. i have the adapter plate and manifold if anyone is interested.