autopower cage
Thread Starter
Member
Joined: Feb 2002
Posts: 1,398
Likes: 0
From: Foo Land
autopower cage
Just put in my autopower cage and snap some pic's. I got it for 300.00 what do u guys think?
***more pic's on page 2***
I feel the car alil stiffer then b4
The real autopower....
Modified by si foo at 11:19 AM 8/5/2004
***more pic's on page 2***
I feel the car alil stiffer then b4
The real autopower....
Modified by si foo at 11:19 AM 8/5/2004
Thread Starter
Member
Joined: Feb 2002
Posts: 1,398
Likes: 0
From: Foo Land
Re: autopower cage (xmilanoredsix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xmilanoredsix »</TD></TR><TR><TD CLASS="quote">Looks pretty good to me.
How did the install go?</TD></TR></TABLE>
The install was simple about 2 hours, it was alil bitch getting the U in there but it turned out good, a drill with a nice bit and a 15mm wrench and socket got the job done...
I feel a difference on the speed bumps and the lil ramps. So much better on sharp conering cuz my car is so low.
How did the install go?</TD></TR></TABLE>
The install was simple about 2 hours, it was alil bitch getting the U in there but it turned out good, a drill with a nice bit and a 15mm wrench and socket got the job done...
I feel a difference on the speed bumps and the lil ramps. So much better on sharp conering cuz my car is so low.
Trending Topics
Honda-Tech Member
Joined: Jan 2004
Posts: 507
Likes: 0
From: NW Burbs, MN
Re: (navin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by navin »</TD></TR><TR><TD CLASS="quote">4 pt = rollbar..
not a rollcage donkey's....</TD></TR></TABLE>
And unless you plan to add a harness bar, there's not a proper way to mount a 4 or 5 point harness with that roll bar.
not a rollcage donkey's....</TD></TR></TABLE>
And unless you plan to add a harness bar, there's not a proper way to mount a 4 or 5 point harness with that roll bar.
