Looking for mounts for this swap. There is something on market?

Or maybe somebody who did that kind of swaps before can make this mounts for me. Want to buy.

 

i am almost positive they dont make mounts for that swap. i know there have been a few threads about this but i have yet to hear about anyone actually doing it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Deckedlude &raquo;</TD></TR><TR><TD CLASS="quote">i am almost positive they dont make mounts for that swap. i know there have been a few threads about this but i have yet to hear about anyone actually doing it</TD></TR></TABLE>

yup i doubt it will work at all

 

It's been done, search.

 

have fun i hope you have lots of money for this swap because it is gonna be a bitch. But it will kick *** if it works

 

email info@placeracing.com
they sell the mounts an they are very well made with lifetime warrenty the swap is fairly easy and cost the same as droping a h22 in a civic. any ?? ask me ive done the 3rd gen h22 swap two times now, and its getting very popular now, later

 

http://www.preludepower.com/ph...15251
http://www.teaminterlude.com/3rdGenH22Swap.asp
http://www.hpoa.org/showthread.php?t=19076

Here are three links that have all the info that you need. The first two are writeups and the second has alot of good info for the swap. Good luck with it.

 

I read in a couple of places that the placeracing motormounts (not only expensive) but also require modification to fit the H22 properly in the 3gen engine bay .

Also from the threads I've read , a LOT of hacking is required in the engine bay to get everything working (power steering & a/c mainly).

I would love to see a 3gen ripping it up around town in one of these and in hte future if I can i'd love to do this project.

 

no hacking is needed only slight shiming 1/4 inch towrds the passenger side

 

Thanks! This info will help.

Allready there is wery beautifull 3 gen molding shaved yellow diamond painted lude 91 year. Her car .

The H22A5 engine. Europe's 197 Hp version from 99 5 gen lude.

 

looking for a h22 closed deck bare block

 

Yes! You have it? How much?

 

yeah what yohan said. place racing supposedly fired the guy taht engineered the mounts for the 3rd generation prelude h22a swap... (yeah right)
there is also another place that makes them. i do believe they just started to produce them.
http://www.ardperformance.com/...l=229
havent really heard anything about them, but emailing them might give you some answers. make sure and ask them how there mounts compare to those produced by place racing.
as it was said a few folks have done this swap and yes it does seem to be becomming much more popular.
two come to mind....
afterburner who did the swap and has recently turbod it with uberdata for management
http://www.imagestation.com/album/?id=4288988917
and imatuner who did the swap into a 89. also turboing his setup and probably sinking upwards of 20k into the car. http://teaminterlude.com/setup.asp?ModelID=529

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Not_Rice4ws &raquo;</TD></TR><TR><TD CLASS="quote">
and imatuner who did the swap into a 89. also turboing his setup and probably sinking upwards of 20k into the car.
</TD></TR></TABLE>

It looks like he even polished the head.