Sorry for the bad pics, but I need to know how much wear are on these bearings. They look fine to me(meaning that they werent spun) but #3 rod bearings are more worn than the others.(any info on what causes that?) Take a look at them . Do I need to do anything to the crank that these were on before I rebuild?.

Here are pics





Thanks in advance

 

Pictures dont work buddy,

Blaze

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blaze45 &raquo;</TD></TR><TR><TD CLASS="quote">Pictures dont work buddy,

Spoon</TD></TR></TABLE>

 

damn they worked for a second ...

 

no workie

 

clubphoto is not working i guess..
i have them there...ill post em in a bit..





do they work now?

 

Dude those are some horrible pictures.

So <U>yes</U> they are REAL bad.

 

Always replace bearings even if they look ok. Have the crank checked for taper and out of round, the block align honed, and have the big end bore of the rods honed.