Speedra and I were having a discusion last night of custom parts that we would like to see for the prelude.
Aluminum, Fiberglass, or Plexiglass.

Aluminum personalized engraved block off plates.
Fiberglass Gauge Pods
Plexiglas boxes or panels for misc items

I am curious to see if any one else had any thoughts to something they would like to see or have.

 

I would like some plexiglass boxes molded into the trunk behind the wheel wells to hold my stuff.
Also a cold air box similar to the stock air box.

 

a J's racing style intake would be bad *** for a bb6. if i had any knowledge in this area, i would deff make a carbon fiber one.

 

Fiberglass Gauge Pods... that would be great. I'm still thinking to try this out on my own.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Twiggz &raquo;</TD></TR><TR><TD CLASS="quote">Fiberglass Gauge Pods... that would be great. I'm still thinking to try this out on my own.</TD></TR></TABLE>
Yeah, a triple pod that replaces the dash piece above the center vents on the 5th gen . . . .

And how about bolt-in speaker pods for the doors? Something that'll fit a deep 6.5", and points the driver up into the center of the car.

 

[QUOTE=Daemione]
Yeah, a triple pod that replaces the dash piece above the center vents on the 5th gen . . . .
QUOTE]

exactly.

 

triple gauge pod for the bb4 (i cant find one anywhere)

 

we both have 4th gens, show us a picture of what you guys are talking about on the 5th gens

 

here you are, circled in red is what they are talking about on 5th gens, they want pods there.




Modified by 98TypeSH at 2:22 PM 7/30/2004

 

quarter panels! preferrably carbon fiber but fiberglass would do...i'm sick of repairing quarter panel rust on hondas not to mention, less weight.

 

Y0, I need a kustom fiberglass piece to hold a screen right where my driver's airbag is, y0!



On a serious note, how about an aluminum/carbon fiber fan shroud cover thingie; the plate that goes across between the front bumper and the radiator for airflow, naw mean?!

 

Here you go - 62 bucks for a a template part (#24) from Honda - sell 'em for $100 each with a $25 core refund & they'd sell faster than you can make 'em . . .

 

Carbon fiber Sunroof.. 92-96

 

id like to see a piece that would cover the center vents and air controls on the 4th gen, you could probably fit at least 5 guages in there or maybe 3 and a AFC or something.

this would obviously be for those people who plan to use there AC or heater. like myself

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DarkspeedVtec95 &raquo;</TD></TR><TR><TD CLASS="quote">Carbon fiber Sunroof.. 92-96</TD></TR></TABLE>

 

a good intake manifold (hry up skunk2 )

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LudeyKrus &raquo;</TD></TR><TR><TD CLASS="quote">On a serious note, how about an aluminum/carbon fiber fan shroud cover thingie; the plate that goes across between the front bumper and the radiator for airflow, naw mean?!</TD></TR></TABLE>****, they done made one a thems already, bruh...

http://www.leanracing.com/shroud.htm

$85 plus shipping, and good quality, too....supposed to increase cooling and make a CF hood vibrate less at higher speed


Also want to see for a 4th gen---

-CF front 1/4 panels
-CF sunroof
-Traction bars(hint, hint...)
-CF H23 and H22 intake manifold...HUGE drop in intake temps
-Some nice 1-peice projectors

 

boxes to hold stuff in the trunk, all my stuff moves around because of the turns

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 &raquo;</TD></TR><TR><TD CLASS="quote">****, they done made one a thems already, bruh...

http://www.leanracing.com/shroud.htm

$85 plus shipping, and good quality, too....supposed to increase cooling and make a CF hood vibrate less at higher speed


Also want to see for a 4th gen---

-CF front 1/4 panels
-CF sunroof
-Traction bars(hint, hint...)
-CF H23 and H22 intake manifold...HUGE drop in intake temps
-Some nice 1-peice projectors</TD></TR></TABLE>

yes yes i want these items!!!!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98TypeSH &raquo;</TD></TR><TR><TD CLASS="quote">a J's racing style intake would be bad ***. if i had any knowledge in this area, i would deff make a carbon fiber one.</TD></TR></TABLE>



PLEASE SOMEONE MAKE ONE

 

They need to make poly urethane body kits and other stuff. I heard they dont crack like fiberglass so it sounds good to me.

 

right here is what I want to make for my baby!

http://www.vroclan.com/forum/a...d=371

http://www.vroclan.com/forum/a...d=369

 

I wouldn't mind seeing a replica of this bumper, so that I don't have to pay a thousand dollars.

 

A replacement glass piece for the 4th gen dash with grommits to hold gauge pods.

 

how about something useful instead of all that cosemtic ***** ****..... like a one piece frontend or lexan windows........ or a solid rear axle setup.....