My friend is going to be putting a gsr motor in his 92 hatch. I was wondering what kind of Mods he will need, to get that car into the 12's all motor????
Any opinions would be greatly appreciated! Thanks,
-Rich

 

pretty vague question.. it will be easy to throw it in to the 12s tho... im actually ppretty stoked cuz i just ordered some parts for the gsr... my setup is going to be skunk stage 2 cams, cam gears, jdm itr pistons , mugen head gasket, bigger injectors, fuelpump, valvetrain, manifold, 2.5 exhaust, race header, bored out throttle body, lsd.--- tuned with hondata s200. if u put all this **** in a hatch.. with slicks.. **** that would be pretty dope. and into 12s im assuming

 

i would be alittle wary about putting in the mugen gasket i have seen a few that leak pretty bad and it was installed right

 

I liked my Mugen HG, until I had to redo the head. (unrelated)
Waste of money to buy a new one AGAIN!

 

Doesn't running 12's require at least 250+whp [of course the car varies but in general], someone correct me if I'm wrong.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wongf22b2 &raquo;</TD></TR><TR><TD CLASS="quote">Doesn't running 12's require at least 250+whp [of course the car varies but in general], someone correct me if I'm wrong. </TD></TR></TABLE> depends on power to weight ratio

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wongf22b2 &raquo;</TD></TR><TR><TD CLASS="quote">Doesn't running 12's require at least 250+whp [of course the car varies but in general], someone correct me if I'm wrong. </TD></TR></TABLE>

in an eg hatch especially if its a cx..hell no

 

ive seen 12.8x on 187whp in a 95 dx coupe full interior.

 

so what would be the best thing to do to the motor?
where is bolt ons going to get me? mid 13's???

 

thought it was for ur friend

 

it is!!!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DankgsR &raquo;</TD></TR><TR><TD CLASS="quote">thought it was for ur friend </TD></TR></TABLE>

haha caught up!!! syke, it's all good!

 

13.8-14.0?? gs-r motor in a hatch? with i/h/e?? nah. I have friends left and right and Ive seen ppl who run i/h/e gs-r in a hatch doing low 13.s.....b16a with /i/h/e is like high 13.s a shitty low 14!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wongf22b2 &raquo;</TD></TR><TR><TD CLASS="quote">Doesn't running 12's require at least 250+whp [of course the car varies but in general], someone correct me if I'm wrong. </TD></TR></TABLE>

Wrong

 

put some toda b cams toda header ctr pistons str cam gears spoon flywheel and all the little stuff in between and there you go

 

If you run Toda cams you have to use their cam gears...well they HIGHLY reccomend it