has anyone every got there hondata tuned here?
AR Fabrication, VA
Autothority Performance Engineering, VA
Inline Pro, VA
Tempest Racing, MD
Custom Car Care, VA
SGT Racing, VA
Nu Image Autosports
i've gone to a shop in va that will remain nameless and i think i got dick over on tuning, just wondering if anyone has been to any of these places, and if they are any good
Autothority Performance Engineering, VA
Inline Pro, VA
Tempest Racing, MD
Custom Car Care, VA
SGT Racing, VA
Nu Image Autosports
i've gone to a shop in va that will remain nameless and i think i got dick over on tuning, just wondering if anyone has been to any of these places, and if they are any good
I got my hondata tuned at Tempest Racing like 2/3 weeks ago?
they are some great guys that work down there, jason knows his **** and the other guys have years of experience working with hondas ( amongst other imports)
personally I must say im going to have to give a
mixed review...
I have a pretty decently built b16 that baselined @ 183/122
I went down there on a tuesday ( I live in northern MD and it took 2 hours one way) they charge the standard 150 an hour with tuning and wideband.... I had scheduled a 2-3 hour block expecting a pretty extensive tuning session but was suprised and pretty dissapointed to see it was finished only about 45 minutes- 1 hour after it got on the dyno. My final run pulled 191.8/126, thats about 10 whp and 5 lbs of torque from what it put down un-tuned. I have an extensive list of modifications that you can read about in some of my other posts and I was happy with the numbers, I only expected about 185 whp before I went but only gaining 10whp and 5lbs of torque from hondata? I was dissapointed. I honestly felt that they did not spend as much time tuning as they could have and I know she could of done almost 200 with another hour or so.
They advanced ignition timing, didn't touch my FPR ( but I hondata would take care of the fuel ) and refused to touch my cam gears. I run a pretty aggressive cam and I know piston to valve clearance is always a consideration but they told me they usually dont even mess with it. I got the impression that they are mainly a turbo tuning/building shop that either chooses not to waste time picking out a few more whp out of an all motor car or just don't have the patience to spend tuning one.
For this reason im going to hesitate in recomending them to you if your running an allmotor setup. I don't have any experience at any of the other shops you listed but id like to find out myself which has a great rep. for all motor tuning. just my 2 cents, if you do choose to go to tempest atleast you can rest assured you have competent, knowledgable tecs that I would trust with my car.
they are some great guys that work down there, jason knows his **** and the other guys have years of experience working with hondas ( amongst other imports)
personally I must say im going to have to give a
mixed review...I have a pretty decently built b16 that baselined @ 183/122
I went down there on a tuesday ( I live in northern MD and it took 2 hours one way) they charge the standard 150 an hour with tuning and wideband.... I had scheduled a 2-3 hour block expecting a pretty extensive tuning session but was suprised and pretty dissapointed to see it was finished only about 45 minutes- 1 hour after it got on the dyno. My final run pulled 191.8/126, thats about 10 whp and 5 lbs of torque from what it put down un-tuned. I have an extensive list of modifications that you can read about in some of my other posts and I was happy with the numbers, I only expected about 185 whp before I went but only gaining 10whp and 5lbs of torque from hondata? I was dissapointed. I honestly felt that they did not spend as much time tuning as they could have and I know she could of done almost 200 with another hour or so.
They advanced ignition timing, didn't touch my FPR ( but I hondata would take care of the fuel ) and refused to touch my cam gears. I run a pretty aggressive cam and I know piston to valve clearance is always a consideration but they told me they usually dont even mess with it. I got the impression that they are mainly a turbo tuning/building shop that either chooses not to waste time picking out a few more whp out of an all motor car or just don't have the patience to spend tuning one.
For this reason im going to hesitate in recomending them to you if your running an allmotor setup. I don't have any experience at any of the other shops you listed but id like to find out myself which has a great rep. for all motor tuning. just my 2 cents, if you do choose to go to tempest atleast you can rest assured you have competent, knowledgable tecs that I would trust with my car.
thank you i appreciate your response, at least you mad power, the shop that tuned mine, did,t make any power from the base tune, then i brought it in to have them tweak the cams and still no power. i think they just didn't take the time to play with it. i only put down 193whp and 135tq
yeah man I don't know who to go to either, its hard here on the east coast, everything seems to be in CA 
but yeah it seems like noone wants to spend the time to try and pull HP out of all motor cars, everyone loves tuning turbos, my theory is they make large amounts of HP with very minimal tuning so even an ******* who knows very little could turn up the boost and lean it out a little
while All motor cars may lose HP with even the smallest tweaks. Goodluck with your tuning bro, im considering taking my projects somewhere else as it sits just to see if they can produce any more HP. Let me know where you go and how your experience was and ill do the same. Email me @ towsonb16@hotmail.com if this post is long gone by then. Thanks.

but yeah it seems like noone wants to spend the time to try and pull HP out of all motor cars, everyone loves tuning turbos, my theory is they make large amounts of HP with very minimal tuning so even an ******* who knows very little could turn up the boost and lean it out a little
while All motor cars may lose HP with even the smallest tweaks. Goodluck with your tuning bro, im considering taking my projects somewhere else as it sits just to see if they can produce any more HP. Let me know where you go and how your experience was and ill do the same. Email me @ towsonb16@hotmail.com if this post is long gone by then. Thanks.
The guys at Inline Pro are pretty good. A buddy of mine got his car tuned there. Look on there web site, they some of the fastest cars on the east coast....I'm sure they know what they're doing.
Sgt tunned my car 1 time. Did an awesome job. Remember, time isnt everything. The guys who do this everyday can build you a map to basline with that will be pretty close to your final result, just by you telling them what you have done.
Trending Topics
Hey try this guy. Give him a email and tell him your setup and he will tell you if he can do it or not. Cool guy knows his crap, checkem
Jeff Evans
E-mail Address(es):
jse@boosted-hybrid.com
Jeff Evans
E-mail Address(es):
jse@boosted-hybrid.com
lol well youre in va beach, and the only other hondata tuner that isnt listed there is abacus.
Those guys are pretty good though. Ive had some experience with them.
is that the shop?
Those guys are pretty good though. Ive had some experience with them.
is that the shop?
Thread
Thread Starter
Forum
Replies
Last Post
Ri5e
Forced Induction
6
Sep 9, 2003 11:07 PM




