Looking for Dyno/Tuner in FL to tune an all motor set-up. Any suggestions would be greatly apprecited.

Set-up

Built B16 Head
Ported/Polished
Titanium Retainers
High Comp Valves
Dual Valve Springs
TWM ITB's (FP set at 43lbs)
Crower 413 Cams

ITR Block
Golden Eagle Sleeved 86mm
Comp 14.6.1 (IB Spec Ultimate Pistons)
Crower Rods
Lightened crank/balanced
CTR Tranny
Lightened Flywheel
Stage 3 Clutch
Gator Axles

Fuel-C12
ECU-AEM EMS

Thanks for any assistance

 

South florida perfomance

 

Hey.. wanna run a Civic?...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMGTortoise &raquo;</TD></TR><TR><TD CLASS="quote">Hey.. wanna run a Civic?...</TD></TR></TABLE>

???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spence &raquo;</TD></TR><TR><TD CLASS="quote">South florida perfomance</TD></TR></TABLE>

From what I dunderstand SFP is know just doing custom fab, and wholesale. I think they sold their dyno and are not tuning any longer I could be wrong.

Only other folks I knew where secret services in Tampa and they closed down from what I have been told and then there is NRG in Tallahassee.

We have just ordered/bought a dynojet and are awaiting it. Should take about 3-4 weeks. We just wanted to get the car tuned before Moroso. The dyno should get here right before the event so we need to get on a roller soon.

 

titan motorsports maybe?

 

We called Titan and they were more into the Boost tuning, they told us that they didn't have enough knowledge on the N/A set-up and tuning. I wish they did though. Again though this was a few months back they might have gotten someone now. Who knows...I will call them on monday to see if they can tune the car.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by velocitytrends &raquo;</TD></TR><TR><TD CLASS="quote">We called Titan and they were more into the Boost tuning, they told us that they didn't have enough knowledge on the N/A set-up and tuning. I wish they did though. Again though this was a few months back they might have gotten someone now. Who knows...I will call them on monday to see if they can tune the car.</TD></TR></TABLE>

I think Darren at Titan should be able to help you out.... if not give me a call 407-366-4642 and ask for Angel

 

yeah, i know darren from titan personally and he is very good at tuning.. he knows alot about all motor and built several low 12 second all motor cars but he is really into boost now.. he built a red eg with a bone stock motor with nothing but a block guard, boosted it and it ran 11.7 on 26lbs of boost and that car is still runningt strong almost a year latter

 

That sucks titan doesn't do all motor tunning. I guess i'll have to be going somewhere else. Was going to call them up soon. Other than that SFP


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMGTortoise &raquo;</TD></TR><TR><TD CLASS="quote">Hey.. wanna run a Civic?...</TD></TR></TABLE>

Fawking retard

 

have you tried getting in touch with mase, i have only heard of good thing from him! im him, he might be able to help you. hope to see you at moroso

 

LHT perfomance in tampa


Or go on Tamparacing.com and post about this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by velocitytrends &raquo;</TD></TR><TR><TD CLASS="quote">We called Titan and they were more into the Boost tuning, they told us that they didn't have enough knowledge on the N/A set-up and tuning. I wish they did though. Again though this was a few months back they might have gotten someone now. Who knows...I will call them on monday to see if they can tune the car.</TD></TR></TABLE>

we have a great knowledge of NA honda's - 3 of us here are all motor die hards for honda's - Darin has more than enough knowledge to tune your car with hondata, uberdata, aem, motec, etc

 

My humble apologies to Darin for having mispelled his name But as I said above, he should be able to help you out.

 

Hey steve, i saw the pics of the car, looks good. hopefully we can get you better numbers w/ this new setup lemme know when you get everything assembled and ready to go and ill setup a dyno appointment.

 

Titan I am glad to here you guys are available now for N/A tuning, I appreciate it! I'm sure you guys know your shyt pretty good. That SFWD Civic is tearing it up from what I have been reading.

Soon we will have our own dyno after all the looking and asking for some time.

Mase the block should be here by late next week, I'm assuming thursday or Fri. I will be on that build until done. If Saturday is good for you let me know.

I just want to get it done for the Moroso event. I will send you the AEM file tomorrow ASAP of the previous tune.

Hopefully we can set up the dyno in G-Ville or Sarasota, worse case do a street tune. We'll see.

Again Thanks!

 

pick sarasota cause thats where i am.....nice setup btw hope it puts down good numbers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TitanMotorsports.com &raquo;</TD></TR><TR><TD CLASS="quote">
we have a great knowledge of NA honda's - 3 of us here are all motor die hards for honda's - Darin has more than enough knowledge to tune your car with hondata, uberdata, aem, motec, etc</TD></TR></TABLE>


That's good to know.

We called you guys at the end April, beginning of May and I was transfered to 3 different people and all three of them told me that they had no experience with ITB's and that they wouldn't be able to tune it.

I don't remember the names, but I wish I did.

-not trying to call you guys out or anything. I'm honestly glad to know you guys can tune it. Incase of a problem, we know we have someone close by to take it to.