2000 ITR for sale!
so after building it up, im ready to sell my project car and move into a tsx..hopefully even a new tl! but first i need to sell the R.
2000 phoenix yellow acura integra type-R #1380/1500
body has 100k engine has about 30k
interior is all stock<except for jdm red stitched shift boot> and exterior is stock as well.
completely new block and built head at 68k miles from Jeff at import builders.
head was opened up at 88k miles to see how well everything was holding up. A couple of the retainers looked a bit thin so we replaced all of em with type R retainers instead of titanium ones.
2l sleeved block with IB spec wiseco piston and eagle rods at 12:1 C/R
P&P fully built portflow head with skunk2 stage 2 cams and ferrea valves
AEM fuel rail and FPR with RC440 injectors
comptech icebox and toda header with carsound highflow cat and greddyEVO cat back
clutchmasters stage 4 clutch and 7.5lb flywheel
hondata s100 tuned by phillip at intercrew auto salon in dallas tx.
car put down 214/148 uncorrected
this is what the type r should have felt like from the factory..plenty of low end torque for around the town driving and a ton of power when you want to move..
asking price is 17k for the beast and im willing to work with you on delivery wherever you are located at, im sure we'll work somthing out. i'm not above going on a road trip...
e-mail if your interested in the car or have any ?'s at itr1380@hotmail.com
pics will be up soon.
Modified by YellowR2000x2 at 4:24 PM 5/14/2005
Modified by YellowR2000x2 at 4:25 PM 5/14/2005
2000 phoenix yellow acura integra type-R #1380/1500
body has 100k engine has about 30k
interior is all stock<except for jdm red stitched shift boot> and exterior is stock as well.
completely new block and built head at 68k miles from Jeff at import builders.
head was opened up at 88k miles to see how well everything was holding up. A couple of the retainers looked a bit thin so we replaced all of em with type R retainers instead of titanium ones.
2l sleeved block with IB spec wiseco piston and eagle rods at 12:1 C/R
P&P fully built portflow head with skunk2 stage 2 cams and ferrea valves
AEM fuel rail and FPR with RC440 injectors
comptech icebox and toda header with carsound highflow cat and greddyEVO cat back
clutchmasters stage 4 clutch and 7.5lb flywheel
hondata s100 tuned by phillip at intercrew auto salon in dallas tx.
car put down 214/148 uncorrected
this is what the type r should have felt like from the factory..plenty of low end torque for around the town driving and a ton of power when you want to move..
asking price is 17k for the beast and im willing to work with you on delivery wherever you are located at, im sure we'll work somthing out. i'm not above going on a road trip...
e-mail if your interested in the car or have any ?'s at itr1380@hotmail.com
pics will be up soon.
Modified by YellowR2000x2 at 4:24 PM 5/14/2005
Modified by YellowR2000x2 at 4:25 PM 5/14/2005
Thread
Thread Starter
Forum
Replies
Last Post
2k1_ITR_0736
All Motor / Naturally Aspirated
17
Oct 23, 2005 06:15 AM



