I have a 90 accord 4 dr with jdm obd1 h22 5 speed motor swap. The driver side axles are long. I have tried every possible combo with accord and prelude axles and all of them are too long. Does any one have the mystery answer, everyone that I've talked to gives me a differ combo that doesn't work. Please post up if you have done this swap. Thanks in advance!!

 

what about the intermediate shaft? Do you replace those along with the axle swaps?

 

Take EVERYTHING out including the intermediate shaft and then put ALL accord stuff in including intermediate shaft.

 

We have tried many combinations-Thanks for the help.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR632 &raquo;</TD></TR><TR><TD CLASS="quote">We have tried many combinations-Thanks for the help.</TD></TR></TABLE>

So, I'm assuming that you have tried to install the accord axles and intermediate shaft at the same time?

I'm currently driving with that setup, but I'm driving a 6th gen. However, from what I've been reading using the accord axles and intermediate shaft is the way to go.

Sorry if I can't help you out.