Well I got this exhaust a month back have had it on my car for about 3 weeks. To start I liked the sound of it and well not i kinda dont. So I think I am going to sell it. Its a Therman R&D Classic Part# B111-C108 for a 90-93 Acura Integra(http://www.thermalrd.com/acura.htm) whish the mid pipe was still that shiny was but stainless steal when heated does turn coperish, the muffler is still nicce and clean like the photo! The only real problem with the exhaust is the dint in the muffler thats it. I purchased it like that not knowing but does not hurt the performance, cant really see it when you look at the car from a distance ony when you look under the car. I put a silencer on it to try and quiet the exhaust down a bit since I was getting complaints. SO since I was unable to find an oddball 3 5/8 sized silencer I just took a 4" silencer and cust the fringe flat off and screwed the silencer inside the exuast, the screws DID not go through the outsided so the silencer can be removed and you would not tell there was one! Starting price is $525CDN, unit sells new for over 500US! Contact me kwalsh24@execulink.com


Here are some photos and Audio Clip!

Here are some photos of the exhaust. Took the rear end part off today to fix a leaky seal. Thanks E-mail me or respond if interested, but e-mail is the key!









AUDIO CLIP! It sound crappy my camera does not have a very good mic on it. But theres more to the actual exhaust then that, this clip is also take without the silencer on..... my car is also 100% stock just bolted the catback on everything else up is stock, so that also may change the sound of the exhaust. clip starts at idle, revs up to about 4000rpm and back down to idle....

http://www.execulink.com/~swal...k.mp3


Modified by Kwalsh24 at 10:10 PM 7/18/2004

 

wow you went and fucked that exhaust up in no time flat, btw the classic exhaust is being sold for a hair under 500 US

 

What do you mean, btw dont need comment like that. If your not interested dont respond.

 

BTW This exhaust was purchased used to begin with. And I am open for offers.... I just put a price on it and have people shoot some offers at me.

 

fair enough.........but maybe that shoulda been stated to begin with

 

My bad thought it was in there, anyhow bump!

 

BUMP!

 

bump...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DAMCOOLDAV &raquo;</TD></TR><TR><TD CLASS="quote">wow you went and fucked that exhaust up in no time flat, btw the classic exhaust is being sold for a hair under 500 US</TD></TR></TABLE>

$525CDN is his starting price ... do a little conversion ...400.24 .. .so yes it is under 500 ... and how do you know what happen to the exhaust ? ... if you dont want it ... dont buy it ..

 

Thanks Vera,

I think its jsut the fact that the user who had it before me did not pollish it before he installed it thus the exhaust warmed up, turned copper in the midpipe, b/c that area does get mighty worm. The exhaust itself is still shiny less the dinted section. So yea its under 500us and its my starting price, also that 500new also has taxes on it so your still looking way over 500US! I am just selling it becasue of the complaints from my pesty neighborhood, they hat any moded vehicles period, so they try to take it out on me, so with the silencer off its too loud for them not as quiet as stock, and with the silecer on I just dont care much for the sound thats all! Thus the reason for selling and I also need money for my other G2 I just got, needs some work and I need some cash to do the work that needs to be done!

 

good ole G2 ... bump bump

 

BUMP... Audio Clip now working again!

 

i will give you 350 shipped.

 

to where and what funds? My price was listed in Canadian.... thus far I have 350canadian w/o shipping.

 

340 shipped to michigan. zip 48801. i thought about it and your exhaust looks pretty dirty so i cant tell if it has any scratches. so i will give you 340 shipped now. let me know thanks man.

 

I just tried to do an estimate on your postalcode and i am getting back invalid postalcode error.

 

thats weird my zip code is 48801 alma michigan try that. can you post some closer pics of the exhaust or clean it up and take some pics. thanks

 

Ok got a quote, cant clean it up really since i have nothing to clean it with, no polish or anything, and I dont currently have my digi camera...

 

then i dont want to pay any more than 320shipped b/c i dont know how scratched up it is or what the dint looks like. i need to know that this is not damaged. i bought a thhermal cat back for a crx which came with a bent b pipe two months ago from b2finity. so i dont want to get riped off again. let me know, thanks

 

the mid pipe is not bent, there is a dint in the bottom of the exhaust thats all i can say its hard to ecplain. I dont think I can do it for 320 shipped.... I will think about it and let you know.

 

There I took the exhaust off the car and snaped some more shots, but like i said I have nothing to clean it with, this just shows the exhaust itself.

 

thanks for the pics man. the muffler looks pretty banged up on the bottom of the muffler. i will have to think about it too. i am talking to someone else selling one in better shape for 300 but it is 3in. let me know though i kind of want a 2 1/4 one.

 

Its not that bad but ok, and yes it is a 2 1/4" pipe. If I were to ever get another exhaust it would be a 2.5 or 3" pipe since my long term goal is a turbo but who know. But looks like doing the exhaust today was a waste of time today but oh well. Thanks anyhow. Bump...

 

sorry man, but thanks a lot. you could have took a pic of the bottom of the muffler on the car. good luck selling it. i am going to meet that guy in chicago this weekend to buy it for 300. thanks though sorry for the inconvience.

 

Thanks for wasting my time. Bump.... BTW people like you should not be allowed, if you dont plan to buy dont bother putting in an offer.