is the 94 Accord crank bolt reverse threaded?

 

regular thread,just a bitch to get off

 

Yea i have to take it in to a shop or something because my 1000 ft/lbs IR torque wrench won't get it off because my compressor is too weak i think. Any idea how much they might charge for that?

 

Did you really have to create a new thread for this? Your other post about your crank pulley bolt is still on the first page.

 

we stuck a screwdriver in my powersteering pulley and used a sledge hammer to hit a brakerbar attached to the bolt....we also bent the pulley which ended up in me snapping the belt at the track the other night

 

Yea i should have just added this to my other post...sorry about that. Usually when there are a lot of responses, people tend to not feel like reading it all so i get no responses. I also presently have no car, so it is pretty urgent. Sorry.

 

Mine was ridiculous to get off, pounded on it for 3 minutes at 1100ft lbs and had to use a 1 in impact gun. We applied so much force the bolt was dented when we removed it from the crank.
The guys gun sounded like a d16 with a handle.