FS or Trade: Tein Flex, AEM V2, RSR Exmag
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 4,699
Likes: 0
From: Houston and Minneapolis, TX/MN, USA
FS or Trade: Tein Flex, AEM V2, RSR Exmag
NEW PRICES!!!!!!!!!!!!!!!! Shipping included in all the items!!
Just as it says above
Groups Shots
I got some Tein Flex complete setup. $910 SHIPPED
It has been on my 98 Civic coupe for roughly 2-3000 miles on them.
And the previous owner had them for only 2-3000 miles on them.
So you are looking at a pretty much new setup.
The AEM V2 is in good condition. $190
Needs a new filter. (i believe it is for b-series but I have it on my EX)
Once again sorry that it is still on my car. Soon as I get all the stock parts I need I will take it off.
Was able to get 2 shots of the AEM v2
RSR EXmag has only been used for 2 months. SOLD
Ingalls camber kit only Rear. $Best offer$ (Fronts have been sold)
I never got around to installing these. Previous owner stated he put on 30,xxx miles.
I had painted the rear camber
Endless brake pads for all 4 corners (new) 125 shipped (fits multiple cars) parts number: front ep306vn and the rear ep210vn
Russell ss brakelines. $bo$ (new) 8462
Prothane Complete Kit $bo$. These are all new still in the box. I had to use a couple of the bushing for my car. The following are not included: 1 rear lca bushing, 1 tie rod boot, 2 sway bar endlinks. Thats it all rest is complete.
Tenzo R Lower Tie Bar was told this is for a 96-00 Civic never installed it. $bo$
TAKING OFFERS
Would prefer pick up but will ship if needed.
Also CRX stuff I need:
Willing to trade parts for:
88 CRX parts:
Performance exhaust
Radiator (stock/performance)
Suspension
Integra Door Panels PARTS
CRX power windows setup
Rota Slipstreams w/good tires
B-series parts I need ASAP!!! I need 2 setups would like one cheap and one nice setup.
Motor Mounts
Shift Linkage
Test Pipe (cat)
B-series cable tranny (GSR YS1 LSD) would be preferred but will take anything besides LS (YS1)
B-series clutch/pressure plate (to go with the tranny
B16a2 Lightened Flywheel
Modified by vtecn8ive at 9:49 PM 8/14/2004
Just as it says above
Groups Shots
I got some Tein Flex complete setup. $910 SHIPPED
It has been on my 98 Civic coupe for roughly 2-3000 miles on them.
And the previous owner had them for only 2-3000 miles on them.
So you are looking at a pretty much new setup.
The AEM V2 is in good condition. $190
Needs a new filter. (i believe it is for b-series but I have it on my EX)
Once again sorry that it is still on my car. Soon as I get all the stock parts I need I will take it off.
Was able to get 2 shots of the AEM v2
RSR EXmag has only been used for 2 months. SOLD
Ingalls camber kit only Rear. $Best offer$ (Fronts have been sold)
I never got around to installing these. Previous owner stated he put on 30,xxx miles.
I had painted the rear camber
Endless brake pads for all 4 corners (new) 125 shipped (fits multiple cars) parts number: front ep306vn and the rear ep210vn
Russell ss brakelines. $bo$ (new) 8462
Prothane Complete Kit $bo$. These are all new still in the box. I had to use a couple of the bushing for my car. The following are not included: 1 rear lca bushing, 1 tie rod boot, 2 sway bar endlinks. Thats it all rest is complete.
Tenzo R Lower Tie Bar was told this is for a 96-00 Civic never installed it. $bo$
TAKING OFFERS
Would prefer pick up but will ship if needed.
Also CRX stuff I need:
Willing to trade parts for:
88 CRX parts:
Performance exhaust
Radiator (stock/performance)
Suspension
Integra Door Panels PARTS
CRX power windows setup
Rota Slipstreams w/good tires
B-series parts I need ASAP!!! I need 2 setups would like one cheap and one nice setup.
Motor Mounts
Shift Linkage
Test Pipe (cat)
B-series cable tranny (GSR YS1 LSD) would be preferred but will take anything besides LS (YS1)
B-series clutch/pressure plate (to go with the tranny
B16a2 Lightened Flywheel
Modified by vtecn8ive at 9:49 PM 8/14/2004
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 4,699
Likes: 0
From: Houston and Minneapolis, TX/MN, USA
Re: FS or Trade: Tein Flex, AEM V2, RSR Exmag (BlazinCivic)
I'm going to try getting pics up today. But they are still on my car until I get stock ones. Same with all rest but I'll try getting pics up today. Will have them up tomorrow got the pics developed tonight.
Come one buy these!!!
Modified by vtecn8ive at 8:21 PM 7/12/2004
Come one buy these!!!
Modified by vtecn8ive at 8:21 PM 7/12/2004
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 4,699
Likes: 0
From: Houston and Minneapolis, TX/MN, USA
Re: FS or Trade: Tein Flex, AEM V2, RSR Exmag (DeviousCTR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DeviousCTR »</TD></TR><TR><TD CLASS="quote">975 shipped for flex?</TD></TR></TABLE>
Yup need to get my car back to stock ASAP!
Yup need to get my car back to stock ASAP!
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 4,699
Likes: 0
From: Houston and Minneapolis, TX/MN, USA
Re: FS or Trade: Tein Flex, AEM V2, RSR Exmag (vtecn8ive)
Bump TTT come, some ones got to want this stuff.
The RS-R exmag is Japanese built and is an Awesome sleeper look it is 60mm and a 3 in tip.
The Tein Flex sell for 12-1400 (new). And you have the option of using Teins EDFC with it, all you do to adjust dampening is through a push of a button.
The AEMv2 is best out there. It comes with it complete the filter needs to be changed or cleaned with AEM cleaner.
The the Ingalls are mint. They are used for camber, if you've lowered your car or/and have put aftermarket rims on there you should get these otherwise your car will suffer from Camber wear. You'll notice on the inside of your tire is alot more worn then the outside. This kit is for the front-back-side-side. Complete.
The RS-R exmag is Japanese built and is an Awesome sleeper look it is 60mm and a 3 in tip.
The Tein Flex sell for 12-1400 (new). And you have the option of using Teins EDFC with it, all you do to adjust dampening is through a push of a button.
The AEMv2 is best out there. It comes with it complete the filter needs to be changed or cleaned with AEM cleaner.
The the Ingalls are mint. They are used for camber, if you've lowered your car or/and have put aftermarket rims on there you should get these otherwise your car will suffer from Camber wear. You'll notice on the inside of your tire is alot more worn then the outside. This kit is for the front-back-side-side. Complete.
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 4,699
Likes: 0
From: Houston and Minneapolis, TX/MN, USA
Re: FS or Trade: Tein Flex, AEM V2, RSR Exmag (vtecn8ive)
NEW SUPER LOW PRICES!!!! I need to get rid of these by Tuesday. Somebody buy them!!!!
Modified by vtecn8ive at 10:00 PM 7/17/2004
Modified by vtecn8ive at 10:00 PM 7/17/2004