Any howto's on mounting EG Ferio rear seats?
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 395
Likes: 1
From: Netherlands, Netherlands
Any howto's on mounting EG Ferio rear seats?
I picked up some ferio/vti seats + rear seats last week.
I had to be fast, the guy selling them asked 250euros so they would be available for long. They are in my attic now but I didn't have time to find out if I could just mount them in my EG9.
Searching just gave me a lot of threads of people looking for these seats.
The stock seat is held down by 2 pins but the 2 sections of the ferio seat have 2 pins each, are al the holes allready present in my EG 4door? I'm also a bit worried bout the plastic console that goes in between them, will that bolt right in?
I had to be fast, the guy selling them asked 250euros so they would be available for long. They are in my attic now but I didn't have time to find out if I could just mount them in my EG9.
Searching just gave me a lot of threads of people looking for these seats.
The stock seat is held down by 2 pins but the 2 sections of the ferio seat have 2 pins each, are al the holes allready present in my EG 4door? I'm also a bit worried bout the plastic console that goes in between them, will that bolt right in?
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 395
Likes: 1
From: Netherlands, Netherlands
Re: Any howto's on mounting EG Ferio rear seats? (zanthrax)
Yesterday I started taking out the default seat to try and fit the new pieces.
I had to remove the bracket where the 2 pieces of the backrest hinge on with a metalsaw and remove the mechanisme that holds and releases the largest backrest by drill out the spotwelds.
After cut 2 small slits in the carpet to fit the to seatings everything bolted right in.
All the holes were present except for the centre console where I had to use 2 sets of nuts and bolts and some washers to mount it.
I didn't have the brackets that hold the headrests but 2 pieces of wood also worked.
I had to remove the bracket where the 2 pieces of the backrest hinge on with a metalsaw and remove the mechanisme that holds and releases the largest backrest by drill out the spotwelds.
After cut 2 small slits in the carpet to fit the to seatings everything bolted right in.
All the holes were present except for the centre console where I had to use 2 sets of nuts and bolts and some washers to mount it.
I didn't have the brackets that hold the headrests but 2 pieces of wood also worked.
Trending Topics
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 395
Likes: 1
From: Netherlands, Netherlands
Re: Any howto's on mounting EG Ferio rear seats? (Split Image Prez)
It isn't to much work, I mentioned the mayor pitfalls above.
I did both front seats in 45mins. and the rearseat took about 2,5 hours.
I tried to get everything in before dark, so I didn't take the time to make pics of the process.
The cussion on the front armrest was black and the rear one was grey, so I put some of the same skai in used for my doorpanels and shiftboot on them both.
These came from a EUDM EG Civic 4dr VTi (with B16A2), the ones in Holland are all black with black interior but IIRC in Germany they also have grey interiors and different paintcolors.
I did both front seats in 45mins. and the rearseat took about 2,5 hours.
I tried to get everything in before dark, so I didn't take the time to make pics of the process.
The cussion on the front armrest was black and the rear one was grey, so I put some of the same skai in used for my doorpanels and shiftboot on them both.
These came from a EUDM EG Civic 4dr VTi (with B16A2), the ones in Holland are all black with black interior but IIRC in Germany they also have grey interiors and different paintcolors.
Trial User
Joined: Nov 2003
Posts: 2,756
Likes: 0
From: DFdub, Tx
Re: Any howto's on mounting EG Ferio rear seats? (OZ Rally)
Nice interior. What is all the interior for Sedan models that will bolt right in? Because my grey **** is such weak sauce. Freaking hate the color and how it stains so easily.
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 395
Likes: 1
From: Netherlands, Netherlands
Re: Any howto's on mounting EG Ferio rear seats? (OZ Rally)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OZ Rally »</TD></TR><TR><TD CLASS="quote">got any pics of the whole car?</TD></TR></TABLE>
don't laugh:
don't laugh:
Joined: Feb 2003
Posts: 154
Likes: 0
From: Madison, AL
Re: Any howto's on mounting EG Ferio rear seats? (zanthrax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zanthrax »</TD></TR><TR><TD CLASS="quote">
don't laugh:
</TD></TR></TABLE>
It doesnt look bad....just the mile high spoiler....
don't laugh:
</TD></TR></TABLE>It doesnt look bad....just the mile high spoiler....
Honda-Tech Member
Joined: Aug 2003
Posts: 775
Likes: 0
From: wisconsin, US
Re: Any howto's on mounting EG Ferio rear seats? (veReze)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by veReze »</TD></TR><TR><TD CLASS="quote">It would be a nice car if you ditched the spoiler.</TD></TR></TABLE>
word...
word...
Honda-Tech Member
Joined: Oct 2003
Posts: 1,775
Likes: 0
From: www.rideekulo.us
Re: Any howto's on mounting EG Ferio rear seats? (sohcvtec1995)
ok, i'll be the first *******, even though i normally don't do this... but BAHAHAHAHA 
naa man, the car would be nice minus the third row seating on the trunk
EDIT: wtf is the artsy looking contraption in the background there?
naa man, the car would be nice minus the third row seating on the trunk
EDIT: wtf is the artsy looking contraption in the background there?
Thread
Thread Starter
Forum
Replies
Last Post
Nocturnal
Honda Civic / Del Sol (1992 - 2000)
4
Jan 7, 2003 11:42 AM
