so i switched out basically a complete front end of a 95 ex into a 93 cx, in my srs stuff i had two sensor like things in the floor, from the 95 there is none, im afraid to plug any of it in because it may blow out?.... not sure what would happen, but where are the sensors at? im almost positive i switched it all, but i'm not sure

I now have the two air bags driver and pass installed, but not hooked up, they still have the jumpers on them


My questions...


What are the two things found in a 93 in driver and pass side floor?
-if they are sensors
--Where are the sensors (in 93 i found one in driver and pass side floor) on the 95?

Is it safe to hook up the air bags?

 

bump, come on where are all the honda experts?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stingray2772 &raquo;</TD></TR><TR><TD CLASS="quote">My questions...


What are the two things found in a 93 in driver and pass side floor?
-if they are sensors
--Where are the sensors (in 93 i found one in driver and pass side floor) on the 95?


</TD></TR></TABLE>
Those are the impact sensors. The impact sensor is in the SRS control unit on 95 models.

 

up, i need to know too

 

so if i swapped over the yellow lines and the dash with the air bag and steering wheel airbag and the srs computer it should be fine to hook all the lines up and everything?

 

bump