I was curious to know how many ITR's out there are running the Spoon or BBK equivalent 70m throttle body. I woud think that 70mm is a little large, but i could be wrong. I am about to purchase a 66mm billet TB from jdmhondaparts.com, but am stuck between the two. Any info would be of help. thanks

 

well isn't the 70mm spoon tb tapered like most overbored tb's? so its not 70mm throughout, it goes down to like 66mm or something?

correct me if im wrong.

 

SPOON 70mm tbody is a stock bore..it just tapers out to 70mm...just a little velocity stack..

 

i thought the samething and i mad a few calls and apparntly 70mm is straight through and not tapered

 

I have the Spoon...the actual plate (which makes the difference) isnt 70mm..its stock size. Just the end tapers out to 70mm..i havent dynoed it yet..but i did feel a difference in mid-range.

 

i own the tbody...i thought i would need to port match it to my intake manifold..but no...stock bore..just tapered out to 70mm

 

i wonder why sheng at jdmhondaparts.com told it was staight through 70mm?????

 

hahaha sheng ..sometimes that guy gots too much on his mind...
i was talking to him while he was reading an email with a cell phone on one ear..and another phone on the other..hahaha
he sold me my tbody

 

thats pretty funny cause when i called him today, he did the samething

 

hehehe it's fun running or working a retail/distribution/tuning shop, got 5 lines ringing off the hook at all time, people coming into the shop and then orders being placed on top of recieving and shipping **** all day long I love my job (no I don't work at JDMhparts.)

 

i have a 68mm tb from holley...
fells good hella midrange!!

 

email

alan@aj-racing.com for more info

 

Like EP said
PS There in stock if you need one

 

Yeah it comes with stock throttle plate and SPOON only bore it out to 70mm, it's tapered in shape not straight into the throttle plate. This will help on throttle response and gain some power at the mid range.

 

I am getting one next week, just wonder is it just straight bolt on?? or do I need any changes?? Thanks!

 

would this (spoon TB) be beneficial with a skunk2 intake manifold + all motor setup?

 

I saw it somewhere in a HK magazine that said Spoon has a new TB that is 70mm all the way. Anyone have more info on this?

 

i read that Option Fans too, but i'm not sure

 

This is your answer for almost everything... you're like a walking advertisement. Do you work for A & J Racing?

 

i run the Holley billet 68mm
all things equal its pretty mad up top
i had to port match it as it is a real 68mm

 

yeah the spoon tb is only tapered to 70mm on the inlet side. the throttle plate and outlet are still stock.

if you want proof pick up the latest and greatest hyper rev and they have a two page ad in the back showing the stock and bored one side by side...

 

How would that 68mm Holley perform for my set-up? Check my mods below.

Would it hurt my low-end?

 

if I put the 68mm holley on my S2 manifold, would it really help out mid-range and top end? My mid and top is already killa strong already.

Would it hurt low-end?

 

just a fan

 

That's cool, just wondering...