Who has the fastest EG hatch on here???
Post pics, videos, and dyno chart. I just wanna know what the fastest EG hatch is on here. What setup u have and so on.
Thanks guyz,
Chris
Thanks guyz,
Chris
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91glassycrx »</TD></TR><TR><TD CLASS="quote">Post pics, videos, and dyno chart. I just wanna know what the fastest EG hatch is on here. What setup u have and so on.
Thanks guyz,
Chris</TD></TR></TABLE>
Its probably gonna be someone that doesnt post very often an will probably never see this thread. He probably spends every last minute of his time working on his car trying to make it faster.
Thanks guyz,
Chris</TD></TR></TABLE>
Its probably gonna be someone that doesnt post very often an will probably never see this thread. He probably spends every last minute of his time working on his car trying to make it faster.
I have a fast hatch, fastest NO. Far from being the fastest. I don't have pics of the car but I have a dyno sheet that I recently did. Before you clown on it, my compression is like 7.9-8.1:1 . I don't have any 1/4 times and the only 1/8 mile time I have is 8.7 @74mph (intercooler pipe blew off at top of 2nd gear and I had to coast the rest of the way) Anyway, I am far from the fastest, butthis thread was lookin lonely.

Modified by t04ecvc at 6:57 PM 7/3/2004

Modified by t04ecvc at 6:57 PM 7/3/2004
Trending Topics
well i KNOW i dont have the fastest but mine does okay
93 civic si
97 B18c1
skunk2 I/M
type R int cam
dc open header
95 shot wet kit
.631
1.682 60ft
4.899
7.569 1/8th
91.67 mph
9.888 1000ft
11.878 1/4
110.93 mph



and last but not least, for the haters and non believers here is a video
RIGHT CLICK SAVE AS, THIS VID IS 15 MINUTES LONG!
http://www.tamparacing.com/trvids/track8-med.wmv
93 civic si
97 B18c1
skunk2 I/M
type R int cam
dc open header
95 shot wet kit
.631
1.682 60ft
4.899
7.569 1/8th
91.67 mph
9.888 1000ft
11.878 1/4
110.93 mph
and last but not least, for the haters and non believers here is a video
RIGHT CLICK SAVE AS, THIS VID IS 15 MINUTES LONG!
http://www.tamparacing.com/trvids/track8-med.wmv
That guy with the teal hatch with the 83mm GSR motor that made 370-odd WHP at 9 psi from an sc61? Isn't he in the 10's now? There are a lot of fast people on this board, it's hard to keep track of them all.
i have had a problem with dynoing, i have always screwed something up when i gopt ther, but on an MD dyno, same dyno i used ofr my coupe.....i made 183HP, off the bottle and when i looke my exhaust cam had jumped about 20 degrees i dont even know how it was running!
i am going to lighten it up a bit more since it is an Si and switch to 24.5 inch slicks, but she does have insurance and tags and i drive her alot, i love my hatchy
i am going to lighten it up a bit more since it is an Si and switch to 24.5 inch slicks, but she does have insurance and tags and i drive her alot, i love my hatchy
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbsponge »</TD></TR><TR><TD CLASS="quote">well i KNOW i dont have the fastest but mine does okay
93 civic si
97 B18c1
skunk2 I/M
type R int cam
dc open header
95 shot wet kit
.631
1.682 60ft
4.899
7.569 1/8th
91.67 mph
9.888 1000ft
11.878 1/4
110.93 mph
</TD></TR></TABLE>
holy know how to drive batman! BADASS 60 foot. You are my new hero. Awesome times.
liam
93 civic si
97 B18c1
skunk2 I/M
type R int cam
dc open header
95 shot wet kit
.631
1.682 60ft
4.899
7.569 1/8th
91.67 mph
9.888 1000ft
11.878 1/4
110.93 mph
</TD></TR></TABLE>
holy know how to drive batman! BADASS 60 foot. You are my new hero. Awesome times.
liam
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbsponge »</TD></TR><TR><TD CLASS="quote">i have had a problem with dynoing, i have always screwed something up when i gopt ther, but on an MD dyno, same dyno i used ofr my coupe.....i made 183HP, off the bottle and when i looke my exhaust cam had jumped about 20 degrees i dont even know how it was running!
i am going to lighten it up a bit more since it is an Si and switch to 24.5 inch slicks, but she does have insurance and tags and i drive her alot, i love my hatchy</TD></TR></TABLE>
I have the same problem with dynoing. I need to lighten my hatch a lil, but thats too much effort for me right now (lazy). Your times are impressive, what kind of nitrous kit are you using?
i am going to lighten it up a bit more since it is an Si and switch to 24.5 inch slicks, but she does have insurance and tags and i drive her alot, i love my hatchy</TD></TR></TABLE>
I have the same problem with dynoing. I need to lighten my hatch a lil, but thats too much effort for me right now (lazy). Your times are impressive, what kind of nitrous kit are you using?
im using an old(5 years old) nitrous works kit with the huge solinoids.
i cant believe i am getting 1.6s with the stocks shocks/struts and arospeed coilovers!!!!!
people are freaked the hell out!
ive been driving hondas for over 10 years tho
i cant believe i am getting 1.6s with the stocks shocks/struts and arospeed coilovers!!!!!
people are freaked the hell out!
ive been driving hondas for over 10 years tho
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">
1.682 60ft</TD></TR></TABLE>
my GOD man!
i'm assuming slicks? you said stock suspension and only coil overs? no traction bars or anything? i'm still fighting for 1.9's out of my DRs
1.682 60ft</TD></TR></TABLE>
my GOD man!
i'm assuming slicks? you said stock suspension and only coil overs? no traction bars or anything? i'm still fighting for 1.9's out of my DRs

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kaj »</TD></TR><TR><TD CLASS="quote">
my GOD man!
i'm assuming slicks? you said stock suspension and only coil overs? no traction bars or anything? i'm still fighting for 1.9's out of my DRs
</TD></TR></TABLE>
Hahaa, the best 60ft Ive had is 2.0.
my GOD man!
i'm assuming slicks? you said stock suspension and only coil overs? no traction bars or anything? i'm still fighting for 1.9's out of my DRs

</TD></TR></TABLE>
Hahaa, the best 60ft Ive had is 2.0.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mase »</TD></TR><TR><TD CLASS="quote">one of the most powerful daily driven hatches i know of is soundeffects car which put down 641 whp....</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jared »</TD></TR><TR><TD CLASS="quote">Brain Fischer 9.97 at 147 street legal, T4, SFWD classes. thats a 95 teal hatch.</TD></TR></TABLE>
Yeah i would have to say brian..i seen that thing run on the streets and that thing is sick
Yeah i would have to say brian..i seen that thing run on the streets and that thing is sick
Honda-Tech Member
Joined: Sep 2003
Posts: 4,196
Likes: 0
From: Bluffton/Hilton Head,SC / Ft. Lauderdale, FL, usa
Brian fischer (GREEN GOBLIN) or (the green goblin)..something like that i beleive his name is on here..(street)..9.90s@145-147
Gary Gardella (GaryG) ..(full drag)..8.08..@178-180s
Gary Gardella (GaryG) ..(full drag)..8.08..@178-180s
GSR
JE PISTON
EAGLE RODS
SKUNK IM
REVHARD S2C
HONDATA S200B
1000 CC INJECTORS
GM 3 BAR MAP
24.5-9.5-13 SLICK M&H
349 HP AND 237 TRQ 14-15 PSI
REACTION .990
I1 1.632
I2 4.814
I3 7.341
MPH I3 98.255
I4 9.487
ET 11.320
MPH 123.427
1995 civic ex
stock d16z6
apc intake
pepboys muffler
17 inch MOTEGI wheel (bald tires)
ebay bilge pump turbo fan
painted interior
lots of stickers
17.02@81mph
HAHAHA j/j i knew someone needed to do it. so i did dont get to mad and start calling me a ricer. its a joke
stock d16z6
apc intake
pepboys muffler
17 inch MOTEGI wheel (bald tires)
ebay bilge pump turbo fan
painted interior
lots of stickers
17.02@81mph
HAHAHA j/j i knew someone needed to do it. so i did dont get to mad and start calling me a ricer. its a joke
Thread
Thread Starter
Forum
Replies
Last Post
JohnnysEG
Appearance Build Threads
99
Apr 15, 2008 05:34 PM
HuggerHatch
Honda / Acura
1
Apr 26, 2005 07:14 PM








