WTB: Amplifier
Thread Starter
Joined: Mar 2004
Posts: 55
Likes: 0
From: NEW YORK, NY, US
WTB: Amplifier
--------------------------------------------------------------------------------Looking for a used (and preferably cheap...less than $200) amplifier.
Looking for either mono or 2 channel, need some bass in my daily.
Anybody?
Junior Member
Joined: May 2003
Posts: 110
Likes: 0
From: MA
Re: WTB: Amplifier (jvcnyc)
I got an old skool Lightning Audio amp Strike Series the S1.1000d... its a 2 channel or mono bridged amp...puts out i believe 400wx2@4 ohms ...and 600wx1@4 ohms..and 1000wx1@2ohm. Very powerful amp... there is 3 40 amp fuses mounted on the amp. This amp can also be wired down to 1 ohm, and runs fine. Very awesome amp my friend had it in his CRX for SPL and hit 154 with this amp.
I just dont have a need for this amp anymore...
id like to get $200 shipped
Heres a pic of it...
And here's my old cardomain with my old piece of **** car and setup...the car blew *** but the system rocked! http://www.cardomain.com/id/etp72
I just dont have a need for this amp anymore...
id like to get $200 shipped
Heres a pic of it...
And here's my old cardomain with my old piece of **** car and setup...the car blew *** but the system rocked! http://www.cardomain.com/id/etp72
Honda-Tech Member
Joined: Sep 2003
Posts: 3,907
Likes: 1
From: bottom
Re: WTB: Amplifier (etp72)
Honda-Tech Member
Joined: Feb 2003
Posts: 2,475
Likes: 0
From: owen sound,ON, canada
ive got a precision power pc 2200 in limited edition chrome finish.....last of the compition amps from PPI...retailed in canada for 699 was going to sell for 300 canadain .. ill get a pic up today for you .......ask any one in audio PPI was the best...untill they got sold to a welfare company
Member
Joined: Jun 2003
Posts: 1,241
Likes: 1
From: the deep deep south, USA
Re: WTB: Amplifier (Micro)
i have two amps for sale.
Alpine MRV-T707. $140 shipped
RMS Power @ 4 Ohms: 70W x 2 @ 12V
THD at 4-Ohm RMS Power: 0.08%
Bridged RMS Power @ 4 Ohms: 240W x 1 @ 12V
Speaker Level Inputs: No
Preamp Outputs: No
Built-In Crossovers: HP/LP
Bass Boost: 12 dB
Frequency Response: 10-50,000 Hz
Signal to Noise Ratio: 105 dB
Fuse Rating: 2x20 amps
Also, i have a Sony Xplod XM280-GTX. I don't have any pictures, but if you're interested, i could get you some asap. Here is what it looks like. I'll let this go for $70 shipped
80 watts RMS x 2 at 4 ohms
100 watts x 2 at 2 ohms
200 watts x 1 bridged output at 4 ohms
stereo or bridged mono output
4-ohm stable in bridged mode
Tri-way capable (Tri-Way Crossover required)
requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
MOSFET power supply and output stages
50-300 Hz low-pass filter, 12 dB/octave
preamp- and speaker-level inputs
gold-plated connectors
variable bass boost (0-10 dB) centered at 40 Hz
11-1/4"W x 2-1/4"H x 7-3/4"D
PM me if you're interested
Alpine MRV-T707. $140 shipped
RMS Power @ 4 Ohms: 70W x 2 @ 12V
THD at 4-Ohm RMS Power: 0.08%
Bridged RMS Power @ 4 Ohms: 240W x 1 @ 12V
Speaker Level Inputs: No
Preamp Outputs: No
Built-In Crossovers: HP/LP
Bass Boost: 12 dB
Frequency Response: 10-50,000 Hz
Signal to Noise Ratio: 105 dB
Fuse Rating: 2x20 amps
Also, i have a Sony Xplod XM280-GTX. I don't have any pictures, but if you're interested, i could get you some asap. Here is what it looks like. I'll let this go for $70 shipped
80 watts RMS x 2 at 4 ohms
100 watts x 2 at 2 ohms
200 watts x 1 bridged output at 4 ohms
stereo or bridged mono output
4-ohm stable in bridged mode
Tri-way capable (Tri-Way Crossover required)
requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
MOSFET power supply and output stages
50-300 Hz low-pass filter, 12 dB/octave
preamp- and speaker-level inputs
gold-plated connectors
variable bass boost (0-10 dB) centered at 40 Hz
11-1/4"W x 2-1/4"H x 7-3/4"D
PM me if you're interested
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Choi
Audio / Security / Video
8
Apr 19, 2004 10:06 PM
loki2323
Audio / Security / Video
6
Mar 3, 2003 08:14 PM