Turbo kit is custom made with IC piping and Silvia FMIC, HPC xtreme coated manifold, turbine, and SS downpipe (2.5" @ outlet > 3" six inches from outlet to cat), Tial 40 mm wastegate with 9 psi spring and SS dump tube that runs along DP and empties to open ATM under car; Blitz SS BOV; T3/TO4 ball-bearing Super E .46 wheel with an AR of .63; intake pipe with K&N style cone filter. Kit was used about 3,500 miles and has no leaks, blown seals, etc guaranteed. Sold my built turbo motor off and am putting in a genuine JDM Type-S H22a for NA and have no further use for turbo. This is a very street-friendly, quick spooling setup (NOT for those into dragging > mainly strong low and mid-range are highlights with this smaller wheel BB unit). Full boost at ~3500 rpms, and building at 2800 rpms.
*Fitment with stock radiator fans may be too tight > will either need to buy slim fans OR remove 1 stock fan in front of turbo. I have pics > will email them.
$1750 shipped to 48
Spocko_1701a@yahoo.com
$100 for dual slim electric fans (black) shipped with purchase of kit

Additionally

* RPS stage 3 MAX series turbo clutch c (sprung 6 puck carbon claw disc) 3,500 miles and similar engagement to stock with no chatter and holding up to 500 HP (twice as stiff pedal pressure as stock, but not hard to live with on a daily basis) - $250 shipped
* JUN 12 lb. chromoly steel flywheel > resurfaced 3,500 miles ago - $225 SOLD
* NEW (never could figure out how to install it) Apex AVCR boost controller - $375
* H22a4 5-spd tranny c 13,400 miles in PERFECT condition c Quaife LSD installed 5,500 miles ago (has to be the best mod made to prelude) - $1250 shipped
* OR will sell the tranny c RPS clutch, and Quaife already installed for $1450 shipped to 48 states (add $50 for stock flywheel as well)
* Apex Electronic white face EL Boost and EGT gauge (including probe) - $175 each BONUS > if buy both, includes a dual A piller pod holder (black) free!
* OBD-1 P72 ECU ALREADY MODIFIED by Hondata to use with any of their systems - $200 shipped SOLD
* OBD-2 > OBD-1 ECU harness - $100 shipped (completely intact with no splicing)

Let me know soon as my car is at the shop now getting the engine swapped in tomorrow. Kit is out of the car as of today as is tranny as well.

CC or MO preferred, but Paypal is fine as long as you are willing to pay an additional 3.9% of total.

Modified by Spocko at 3:33 PM 6/29/2004


Modified by Spocko at 4:06 PM 6/29/2004

 

pics would help

 

Unable to post pics here, please EMAIL ME Spocko_1701a@yahoo.com and have at least 2-3 MB of space in your inbox for pictures (only way I can do pics).

 

will the transmission fit a 93 h22a1 prelude with no modifications? PM me or IM me on this name

 

All f and H series are interchangable.

Can you send me some pics to teameem@aol.com thanks

 

Emailed you

 

check you pm