Ok... I am finally in the last stages of putting my engine back in the car. My problem is that many of my hoses and such that connect in and around the IM were cut. Since they were cut, they do not have their markings on them (or enough of their markings) to help me figure out where they go.

Also, since I will be putting on my turbo kit, I dont know which vacuum lines to connect to.

Can any one give this idiot some help or put me on the right path?

 

Do you have an H23 or H22?

 

Well here are 2 pages that show it on the H23. Let me know when you are all set so I can take them down.
http://sephro.x-industries.com/h23a1vacuum.pdf

 

there should be a sticker under the hood with a picture of some of the vacum lines

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sephro &raquo;</TD></TR><TR><TD CLASS="quote">Do you have an H23 or H22? </TD></TR></TABLE>

H22

 

Here's a schematic of the h22 vaccum lines