2.1L DART talldeck: Take 2
Thread Starter
Honda-Tech Member
Joined: Feb 2000
Posts: 2,188
Likes: 0
From: Suburbs of Detroit, MI
2.1L DART talldeck: Take 2
Figured I would keep you guys up to date with my current project again.
(Newbies: Do a search and you will find the original from last fall)
The Original motor developed a rod knock after about 1200 miles ........................................ So I called in a favor and my DART Block is currently sitting at P.A.S./ ROUSH awaiting some parts.
New Wisecos are being made (11:7.1) and a new crank is on its way.
The motor should be done sometime in the middle of July
Here are a couple of pics of the ITR manifold, Extrudehoned, and powdercoated Wrinkle Black by Bill at QC Coatings. http://www.qccoatings.com My AEM intake is being done in the same finish.
I'll keep you guys posted.
Mattj
(Newbies: Do a search and you will find the original from last fall)
The Original motor developed a rod knock after about 1200 miles ........................................ So I called in a favor and my DART Block is currently sitting at P.A.S./ ROUSH awaiting some parts.
New Wisecos are being made (11:7.1) and a new crank is on its way.
The motor should be done sometime in the middle of July
Here are a couple of pics of the ITR manifold, Extrudehoned, and powdercoated Wrinkle Black by Bill at QC Coatings. http://www.qccoatings.com My AEM intake is being done in the same finish.
I'll keep you guys posted.
Mattj
Honda-Tech Member
Joined: May 2002
Posts: 10,082
Likes: 2
Re: 2.1L DART talldeck: Take 2 (Big Phat R)
niceeee..
hey dropspeed.. i'm wondering who can tune my car in your place??
i'm planning to get some cams later and i need to find a tuner.
PS: sorry for jacking your thread
hey dropspeed.. i'm wondering who can tune my car in your place??
i'm planning to get some cams later and i need to find a tuner.
PS: sorry for jacking your thread
Trending Topics
Re: 2.1L DART talldeck: Take 2 (WayneGro)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WayneGro »</TD></TR><TR><TD CLASS="quote">That is sexable. </TD></TR></TABLE>
Honda-Tech Member
iTrader: (1)
Joined: Mar 2003
Posts: 2,968
Likes: 2
From: First in Flight, Type Rs of East Coast, NC, FL
Re: 2.1L DART talldeck: Take 2 (Tweakmeister)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tweakmeister »</TD></TR><TR><TD CLASS="quote"> 
she approves</TD></TR></TABLE>
she approves</TD></TR></TABLE>
Honda-Tech Member
Joined: Mar 2002
Posts: 1,529
Likes: 0
From: my cats breath smells like cat food
Re: 2.1L DART talldeck: Take 2 (v-attack)
I really like that wrinkle coated black finish. Would look sweet on an intake too, more like stock. Good luck with the block...
Thread Starter
Honda-Tech Member
Joined: Feb 2000
Posts: 2,188
Likes: 0
From: Suburbs of Detroit, MI
Re: 2.1L DART talldeck: Take 2 (sackdz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sackdz »</TD></TR><TR><TD CLASS="quote">wow congratulations now once again you can terrorize woodward you damn stunna.</TD></TR></TABLE>
The SRT4 is for Woodward, Nothing worse than being beat by a a Neon, with a babyseat in back and baby toys that runs 13.0 flat @ 105
Mattj
The SRT4 is for Woodward, Nothing worse than being beat by a a Neon, with a babyseat in back and baby toys that runs 13.0 flat @ 105
Mattj
Honda-Tech Member
Joined: Sep 2002
Posts: 917
Likes: 0
From: Springfield, PA, U.S
Re: 2.1L DART talldeck: Take 2 (Bbasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dropspeed »</TD></TR><TR><TD CLASS="quote">The Original motor developed a rod knock after about 1200 miles ........</TD></TR></TABLE>
So who the hell was it that built that piece of junk?
hope to see you at expo
So who the hell was it that built that piece of junk?
hope to see you at expo
Joined: Jan 2004
Posts: 275
Likes: 0
Re: 2.1L DART talldeck: Take 2 (Tweakmeister)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tweakmeister »</TD></TR><TR><TD CLASS="quote">
she approves</TD></TR></TABLE>
i approve of her...ide give her
she approves</TD></TR></TABLE>
i approve of her...ide give her
