I need a new IACV (idle air control valve for my '94 Integra GSR). Wondering if the unit in the link below will work ok. It says for an OBD1 Integra, but I emailed the guy selling it and he said it is out of a '94 EG Civic SiR. Thanks for the help.

 

What link below? Anyway, if the manifold is a B16a2 then it will work. A gen 1 B16a will not work as the bolt pattern is differend

 

oops, here
http://cgi.ebay.com/ebaymotors...=WDVW

 

That won't fit, it's from a B16a1 manifold.
The B18C version looks like this:

 

See how the bolt holes are closer together, check with your one to make sure I'm right though

 

Yes, I noticed that with the bolt holes being farther apart.

 

Any idea where I can get a new IACV for an OBD1 GSR online, etc. (for under $150)?

 

I've been looking for one for my ITR manifold swap for over a year now, but I live in NZ so there are few of them around.
Good luck

 

for me, it's not a matter of finding, one, i can get one pretty easily. i just don't want to spend $100-$200 on it

 

i have one from a type R motor
https://honda-tech.com/zerothread?id=697163