LS/vtec turbo motor (less than 1500 miles) $3200OBO
-stock gsr cylinder head with JG springs and titanium retainers
-sleeved LS B18a bottom end
-GSR crank
-84.5mm JE 9.0 dished pistons
-Eagle GSR rods
-Honda bearings
-Prodrive oilpump gear in new honda oil pump
-CRV head gasket
-ARP headstuds
Custom built turbo kit (fits 94-up RS integra or civics) $3200 OBO
-SC61 T4e compressor .58 AR .76trim T4 exhaust 3" v band
-Tial 46mm wastegate with 1 7/8 304 stainless dump tube
-Greddy Type R blow off valve
-321 stainless exhaust manifold
-brushed 2.5" 304 stainless intercooler piping
-brushed 3" 304 stainless downpipe with 3" stainless flex joint
-Spearco 20x8x3.5" front mount
-intake filter
-complete silicon sleeves and T-bolt clamps

Custom built 3" brushed 304 stainless exhaust with thermal muffler and tip (94-up integra) $400
Walbro 255lph high pressure fuel pump $80
RC 68# bosch injectors to fit honda rail $320
Aeromotive -6 regulator $100 OBO
Apex indiglo mechanical boost guage 30psi $90
Apex indiglo electric EGT guage (no temp prob) $150
GM 3 bar map sensor $70
ACT extreme pressure plate with 6puck disk (92-up B series) $300
88-91 Honda Civic injector resistor box with plug $15


Most stuff has less than 1500 miles on it. Need money for school. I won't split up the turbokit compontents but may split up motor. I will make a deal if purchase multiple items. This is completly tuned and runs almost like stock, so if bought as a package it will be all ready to go. Perfect for a low 11's/high10's street car. Paypal or money order only

Turbohonda94@hotmail.com




Modified by turbohonda at 3:53 PM 7/8/2004

 

ttt for the night

 

What is the part # for the gm map sensor?

 

I don't know the part number but it is the standard GM Ac Delco 3 bar.

 

how much for the block

 

Just the block or the complete bottom end?

 

check ur pm

 

ttt

 

check ur pm

 

how much for just the block?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tchleung &raquo;</TD></TR><TR><TD CLASS="quote">how much for just the block?</TD></TR></TABLE>

 

$2300 for the short block

 

What sleeves are they and who did them?

 

Good seller

 

The sleeves were purchased from exospeed and installed by a machine shop locally.

 

bump good seller

 

ttt

 

up

 

ttt

 

topside

 

bump anyone?

 

Can I get some more info on the injectors?

 

RC Bosch Peak and hold 680cc

 

Custom built 3" brushed 304 stainless exhaust with thermal muffler and tip (94-up integra) $400

Do you have pics and is it for 4-door intregra?

 

top