I really wanted to get all this in and tuned to 9000rpm, but instead I will be selling my All-Motor setup to go Turbo.

So it looks like all these goodies need to go.

I take MONEY ORDER or PAYPAL (Please add 3% for paypal fees)

-----------------------------------------------------------------------------------------------

Header-Tech stainless steel header (B-Series), SMSP 3" Flex pipe, Kteller custom made Catalytic converter 3" inlet / 2.5" outlet

Price I paid:
Header-Tech header - $650
SMSP 3" flex pipe - $110.00
<U>Kteller custom made cat (3" inlet / 2.5" outlet) - $165.00</U>
Total paid - $920.00

Will sell this whole setup for SOLD!!!!
(Will NOT part out!) Comes with all 3 gaskets Brand New

I will throw in the O2 sensor for free.

** Header-Tech headers come with a 3 bolt flange design. You can't use spring nuts and donut gaskets with this header, so the FLEX PIPE is needed for flexibility so nothing will snap or crack. I custom ordered a 3" inch flex pipe from SMSP so I can connect it between the Header and Cat. The Cat was custom ordered from Kteller to make a Magnaflow Hi-Flow catalytic converter have 3 bolt flanges with a 3" inch inlet and a 2.5" inch outlet. You can connect this whole setup to your 2.5" inch exhaust and enjoy the gains.







It's really hard to come by a Header-Tech header. Especially now since Header-Tech is no more until Enzo starts his own shop and fabricate them again. I heard they're STILL on back order. Get it now here!

SOLD!

-----------------------------------------------------------------------------------------------

Skunk2 Stage 1 cams , Skunk2 Cam Gears (Red)

Used for 4k miles.

Cams - $550.00 shipped! OBO
Cam Gears - 150.00 shipped! OBO
BOTH - $680.00 shipped! OBO

-----------------------------------------------------------------------------------------------

BRAND NEW Skunk2 Dual Valvesprings & Skunk2 Titanium Retainers

Valvesprings will work with:
B16A
B16B
B18C1
B18C5

Retainers will work with:
B16A
B16B
B17A
B18C1
B18C5
H22A
K20A



SOLD!

-----------------------------------------------------------------------------------------------

p28 ecu Chipped w/ IH8RICERZ's Custom All-Motor program, OBD2 to OBD1 conversion harness

Awesome ecu for your All-Motor application. It's been Dyno proven to give you Huge gains. Here's a GS-R with bolt-ons and ITR cams that ran on the Dyno back to back with STOCK ECU vs. IH8RICERZ's Custom All-Motor program chipped P28 ECU:

(Got around 20 whp and 20 lbs of torque at 6k rpms!)








Vtec - 5300rpm
Redline - 9200rpm

ECU - SOLD!
Harness - SOLD!

-----------------------------------------------------------------------------------------------

BRAND NEW - ACT XACT ProLite Flywheel
for 1990-2001 Integra B Series DOHC





$210.00 shipped! OBO

-----------------------------------------------------------------------------------------------

PM me or email me at: B00ST2nR@sbcglobal.net

I have a ton of vouches here on H-T and have over 200 positive feedbacks on eBay. I also work at ProStreet Online. You can rest assure I'm not a scammer.





Modified by B00ST2nR at 9:17 PM 6/13/2004

 

Stick with all motor

Unless you dont like traction

 

BUY these bad boys!

 

NO DONT

haha help this guy out

 

dont know why it came up twice edit

 

sell that **** !! TURBO!!

 

BUMP!!

 

booo!!! your car was one of my favorites in the N/A category. Oh well, good luck

 

lol. Everyone's so sad I'm leavin the All-Motor game. Damn... buy these parts before I change my mind!

 

BUMP!


I got ALOT of PM's about the ECU and Header so far. I really don't want to part out the ECU and OBD1 harness, but I guess I can. I told everyone $180 shipped for the ECU, so whoever offers the highest will get it.

As for the header, I will NOT sell the header only. I wanna sell the whole package.

 

UPDATE

I got 4-5 PM's saying they wanna buy the p28 ecu ONLY. I wanna sell the ecu and harness together if I can, so hold on folks. I'm waiting on 1 other person who wants the ECU and Jumper harness together. If that doesn't go through, I'll go ahead and sell the ECU only.


I have a couple people interested in buying the Header-Tech header. 1 person who's close to buying the whole setup for $800 shipped. This is a HOT item so give me your offers ASAP before it's gone.


Got an offer on the Prolite flywheel for $190 shipped so far.

 

 

Would you take any trades for the stafe1s ?

 

Sorry, no trades. I need $$$.

 

PMed you

 

All PM's replied.

 

damn i wish i coukd sell my t1r bpipe, and spoon n1 exhaust, and gget some more cash and buy ur set up

 

 

You have an IM about

 

HEADER-TECH header is PENDING @ $800.00
ECU and HARNESS is PENDING!! @ $250.00
PROLITE FLYWHEEL is PENDING!! @ $200.00
Skunk2 Valvetrain is PENDING!! @ $300.00

When I say PENDING, I mean they're either telling me they wanna buy it or for me to hold onto it for a little longer. That can all change if you want to buy these parts and have the money ready right now or if you have a higher offer. So let me know before these are GONE!

 

Header-Tech header has been sold.


next?

 

is it necessary to have chipped p28 ecu with obd 1 for all motor application,im plannin to go all motor in future,WHATS WRONG WITH STOCK GSR ECU,i will have vafc2

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by greenteg2k00 &raquo;</TD></TR><TR><TD CLASS="quote">is it necessary to have chipped p28 ecu with obd 1 for all motor application,im plannin to go all motor in future,WHATS WRONG WITH STOCK GSR ECU,i will have vafc2</TD></TR></TABLE>

It's not necessary, but stock ECU's are restrictive. Usually OBD1 chipped ecu's will give better gains.

 

is the harness for the ecu obd2b. wondering if it will work on my 00 Si.
-peter

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackSi_sd &raquo;</TD></TR><TR><TD CLASS="quote">is the harness for the ecu obd2b. wondering if it will work on my 00 Si.
-peter</TD></TR></TABLE>

Yes. This harness was for my 00 GSR. It will work with your 00 Si as well.