intake mani
Junior Member
Joined: Mar 2003
Posts: 962
Likes: 0
From: The road
Re: intake mani (Garrett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Garrett »</TD></TR><TR><TD CLASS="quote">ZC on the top, all other D on the bottom
</TD></TR></TABLE>
Humm, the ports on the ZC look bigger, never noticed that before. That ZC manifold isn't gasket matched is it?
</TD></TR></TABLE>Humm, the ports on the ZC look bigger, never noticed that before. That ZC manifold isn't gasket matched is it?
Honda-Tech Member
Joined: Jun 2003
Posts: 1,118
Likes: 1
From: Quebec, QC, Canada
Re: intake mani (Bunger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bunger »</TD></TR><TR><TD CLASS="quote">
Humm, the ports on the ZC look bigger, never noticed that before. That ZC manifold isn't gasket matched is it?</TD></TR></TABLE>
No gasket matched complete stock but repaint
Humm, the ports on the ZC look bigger, never noticed that before. That ZC manifold isn't gasket matched is it?</TD></TR></TABLE>
No gasket matched complete stock but repaint
Honda-Tech Member
Joined: Jun 2003
Posts: 1,118
Likes: 1
From: Quebec, QC, Canada
Re: intake mani (Bunger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bunger »</TD></TR><TR><TD CLASS="quote">
Humm, the ports on the ZC look bigger, never noticed that before. That ZC manifold isn't gasket matched is it?</TD></TR></TABLE>
No gasket matched complete stock but repaint
ZC IM with d16 gasket to compare
the d16 runner are thinner but higher
Humm, the ports on the ZC look bigger, never noticed that before. That ZC manifold isn't gasket matched is it?</TD></TR></TABLE>
No gasket matched complete stock but repaint
ZC IM with d16 gasket to compare
the d16 runner are thinner but higher
Thread
Thread Starter
Forum
Replies
Last Post
Mr.Death
Honda CRX / EF Civic (1988 - 1991)
2
Jun 22, 2006 12:18 PM
crxzcracer
Honda CRX / EF Civic (1988 - 1991)
9
Jun 17, 2005 09:23 PM