I am looking to get sweet mandrel bent piping from kteller.com and i was wondering what all parts i need to complete the system.

If I purchase this exhaust kit http://www.kteller.com/store/p...d/145, what else would i need besides a high flow cat and a muffler with 3" inlet?

On note of cat, what options should i choose? or should I get it somewhere else.
http://www.kteller.com/store/p...d/220

Also if you have built a custom exhaust setup, any tips would be greatly appreciated.

 

tell me more bout your car and what you already have, that will help:

what downpipe, header? are you boosted or not?


might find some pics and help in this big thread i had before:

https://honda-tech.com/zerothread?id=380727

 

I need to build it for a 2000 Integra LS coupe, 5 spd., turbocharged with the drag gen 3 turbo kit.

Doubt it matters except for clearance issues, but it will be lowered 2.5" in the front and 2" in the back with ground control coilovers, koni yellows, and camber kit.

Thanks a lot

 

shoot me an email
at sales@kteller.com

i ll work with you on it more there!

 

kteller btw does your exhaust piping fit with the comptech rear sway and tie on a 94-01 integra?